{"product_id":"cleveland-c09764-taper-length-drill-bit-9-16-in-hss","title":"Cleveland C09764 Taper Length Drill Bit 9\/16 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C09764 is a taper length drill bit engineered for general-purpose metal drilling in demanding trade and industrial applications. Built from high-speed steel with a coated finish, it features a 118-degree standard point angle and a web-thinned, tapered web configuration that reduces thrust and improves chip clearance. The bit measures 9\/16 inches in diameter, with a 9-inch spiral flute length and a 12-inch overall length, making it well suited for reaching deeper hole depths than jobber-length bits. A straight shank allows it to seat directly in standard drill chucks without adapters. This bit conforms to ASME B94.11M standards and is intended for installation and fabrication work performed by machinists, pipefitters, millwrights, and mechanical contractors.\u003c\/p\u003e\n\u003cp\u003eThe C09764 is rated for general-purpose cutting in alloy tool steel, carbon steel, and cast iron. Its regular spiral flute geometry and right-hand cut make it a straightforward drop-in for standard drill press, magnetic drill, or handheld drill driver setups where extended reach is required. The 3-inch shank length and 9\/16-inch shank diameter provide consistent grip and reduce runout in chucks sized for that diameter. This bit is packaged individually and is appropriate for both shop use and field service work where a reliable, code-conforming taper length bit is specified.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel construction with coated finish for extended wear life in ferrous materials\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced thrust and cleaner entry\u003c\/li\u003e\n  \u003cli\u003e9-inch spiral flute length and 12-inch overall length provide taper-length reach beyond standard jobber bits\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, regular spiral flute for efficient chip evacuation in alloy steel, carbon steel, and cast iron\u003c\/li\u003e\n  \u003cli\u003eStraight shank at 9\/16-inch diameter seats in standard chucks without additional adapters\u003c\/li\u003e\n  \u003cli\u003eConforms to ASME B94.11M dimensional standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for cutting alloy tool steel, carbon steel, and cast iron. Fits standard drill chucks accepting a 9\/16-inch straight shank. Designed as a general-purpose taper length replacement bit conforming to ASME B94.11M specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eTaper length drill bits are typically installed and operated by machinists, pipefitters, or mechanical contractors using drill presses, magnetic base drills, or heavy-duty handheld drills. Secure the straight shank fully in the chuck and verify runout before drilling. Always wear appropriate eye protection and secure the workpiece firmly before operation. Reduce feed rate when breaking through the far side of the material to prevent bit walk or workpiece movement.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 950E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 9\/16 inches (0.5625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 9 inches (228.60 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12 inches (304.80 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 3 inches (76.20 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Tool Steel, Carbon Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0012 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C09764\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51716156096818,"sku":"C09764","price":114.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/70042563b02cf39fc8ff21ff217600df.jpg?v=1788522488","url":"https:\/\/voomisupply.com\/products\/cleveland-c09764-taper-length-drill-bit-9-16-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}