{"product_id":"cleveland-c09748-taper-length-drill-bit-5-16-in-hss","title":"Cleveland C09748 Taper Length Drill Bit 5\/16 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C09748 is a taper length, high-speed steel drill bit designed for general-purpose drilling in ferrous and non-ferrous metals. Built to Series 950E standards and conforming to ASME B94.11M, this bit features a 5\/16-inch straight shank, a 118-degree standard point angle, and a web-thinned, tapered web configuration that reduces thrust and improves chip evacuation. The spiral flute geometry and right-hand cutting direction are suited for production drilling and field maintenance work performed by machinists, pipefitters, plumbers, and HVAC technicians working with structural and mechanical assemblies.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is intended for use on alloy tool steel, carbon steel, and cast iron. At 12 inches overall length with a 9-inch flute length, it reaches deeper hole depths than standard-length bits without requiring an extension. The 3-inch shank length provides adequate grip in both keyed and keyless chucks. It is well suited for drilling through heavy-gauge steel plate, pipe flanges, structural steel, and cast iron fittings in residential and commercial mechanical installations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel construction rated for alloy tool steel, carbon steel, and cast iron applications\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003e9-inch spiral flute length provides deep hole capability and efficient chip removal\u003c\/li\u003e\n  \u003cli\u003e12-inch overall length extends reach without an extension for structural and pipe work\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with straight shank — fits standard drill chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eConforms to ASME B94.11M dimensional standards for consistent fit and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use taper length drill bit compatible with drilling in alloy tool steel, carbon steel, and cast iron per Series 950E specifications. Fits any standard drill chuck accepting a 5\/16-inch straight shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by a qualified machinist or trade professional familiar with metal drilling operations. Secure the workpiece fully before drilling and confirm the chuck is tightened to prevent slippage. Use appropriate cutting fluid when drilling cast iron or alloy steel to extend bit life and control heat. Inspect the cutting edges before each use and replace the bit if chipping or excessive wear is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 950E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5\/16 inches (0.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Tool Steel, Carbon Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C09748\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51729236295986,"sku":"C09748","price":59.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/76a8c4aec6e6e1c207b09747fd4d71ea.jpg?v=1788702125","url":"https:\/\/voomisupply.com\/products\/cleveland-c09748-taper-length-drill-bit-5-16-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}