{"product_id":"cleveland-c09733-extra-length-drill-bit-0-5312-in-hss","title":"Cleveland C09733 Extra Length Drill Bit 0.5312 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C09733 is an extra length high-speed steel drill bit designed for deeper drilling and long-reach drilling applications where standard-length bits cannot reach. The bit measures 0.5312 inches in diameter with a 10-inch overall length and a 7.5-inch spiral flute. It features a 118-degree standard point angle with web thinning applied to reduce entry force and improve chip clearance. The oxide finish provides mild corrosion resistance during storage and initial use. With a straight-cylindrical shank and right-hand cutting direction, this bit fits standard drill chucks without adapters. It is suited for use by machinists, pipefitters, and HVAC or plumbing fabricators working in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eThe C09733 is intended for production and maintenance drilling in cast iron and steel — two of the most common materials encountered in mechanical, HVAC, and plumbing rough-in work. The extended overall length makes it practical for drilling through thick structural members, deep flanges, or assemblies where a jobber-length bit would bottom out in the chuck before reaching the workpiece. The regular spiral flute type promotes steady chip evacuation throughout the full flute length. This bit is sold individually and is part of the Cleveland Series 950E extra length line.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.5312 inch diameter with a tolerance of +0.0000 to -0.0012 inches for accurate hole sizing\u003c\/li\u003e\n  \u003cli\u003e10-inch overall length and 7.5-inch flute length for deep-reach drilling\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point with web thinning and tapered web configuration for easier penetration\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction for durability in steel and cast iron applications\u003c\/li\u003e\n  \u003cli\u003eOxide finish for basic corrosion protection\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank — 17\/32 inch diameter — fits standard drill chucks\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting, 2-flute, regular spiral for consistent chip removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for drilling into cast iron and steel workpieces. Suitable for general-purpose deep-reach drilling applications per Series 950E specifications. Conforms to ASME B94.11M and ANSI standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the straight-cylindrical shank firmly in a properly sized drill chuck before use. Always wear eye protection and secure the workpiece before drilling. Reduce feed pressure at breakthrough to prevent grab or bit deflection on long-reach operations. Use appropriate cutting fluid for steel applications to extend bit life and maintain hole tolerance.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.5312 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 7.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 17\/32 inch (straight-cylindrical)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, web-thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-speed steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0012 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast iron, steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 950E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, ANSI, California Prop 65\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C09733\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51695771222322,"sku":"C09733","price":94.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/731e5a30394f4ce62d9dd41d1eb54485.jpg?v=1788338137","url":"https:\/\/voomisupply.com\/products\/cleveland-c09733-extra-length-drill-bit-0-5312-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}