{"product_id":"cleveland-c09723-extra-length-drill-bit-3-8-in-hss","title":"Cleveland C09723 Extra Length Drill Bit 3\/8 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C09723 is an extra length high-speed steel drill bit designed for deeper drilling and long-reach applications where standard-length bits cannot reach. Built to Series 950E specifications, this bit features a 3\/8-inch diameter, a 118-degree standard point angle, and a spiral flute configuration with web thinning for improved chip evacuation and reduced thrust at the cutting tip. The oxide finish provides moderate corrosion resistance and helps retain cutting fluid during operation. At 10 inches overall length with a 7.5-inch flute length, it gives technicians and machinists the reach needed for deep-hole work in tight or extended-access setups.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for production and maintenance drilling in cast iron and steel workpieces where standard-length tooling falls short. Typical applications include deep-hole drilling in structural steel, fabrication work, and mechanical maintenance scenarios requiring extended reach. The straight cylindrical shank accepts standard drill chucks without adapters, making it compatible with handheld drills, drill presses, and milling machine setups. Right-hand cutting direction and a regular spiral type make it a general-purpose choice across a range of shop and field conditions.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra length design at 10 inches OAL for deeper drilling and long-reach access\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction rated for cast iron and steel primary workpiece materials\u003c\/li\u003e\n  \u003cli\u003eOxide finish for corrosion resistance and improved lubrication retention\u003c\/li\u003e\n  \u003cli\u003e7.5-inch spiral flute length promotes efficient chip clearing in deep holes\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance of +0.0000 to -0.0010 inches for consistent hole sizing\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard chucks without additional tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 3\/8-inch drill chucks on handheld drills, drill presses, and milling machines. Primary workpiece materials are cast iron and steel. Conforms to ASME B94.11M and ANSI standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or tradespeople familiar with rotary cutting tools. Secure the workpiece fully before drilling and ensure the shank is seated and tightened in the chuck before operation. Do not exceed the recommended speed and feed for the workpiece material and bit diameter. Consult applicable shop safety standards and OSHA guidelines when operating drilling equipment.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 7.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 950E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, ANSI, California Prop 65\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C09723\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51710937989426,"sku":"C09723","price":59.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/47b18803fb0585d7c736c037277515be.jpg?v=1788472586","url":"https:\/\/voomisupply.com\/products\/cleveland-c09723-extra-length-drill-bit-3-8-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}