{"product_id":"cleveland-c09675-extra-length-drill-bit-0-4062-in-hss","title":"Cleveland C09675 Extra Length Drill Bit 0.4062 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C09675 is an extra length, high-speed steel (HSS) drill bit engineered for deeper drilling and long-reach drilling applications where standard-length bits cannot reach. It carries a 0.4062-inch (13\/32 inch) diameter, an 8-inch overall length, and a 5.5-inch spiral flute length. The 118-degree standard point angle is web-thinned with a tapered web configuration, reducing entry resistance and improving chip clearance on tough materials. An oxide finish provides baseline lubricity and corrosion resistance. This bit is suited for machinists, pipefitters, ironworkers, and maintenance technicians who regularly drill through structural steel, cast iron, and similar ferrous materials at extended depths.\u003c\/p\u003e\n\u003cp\u003eThe C09675 is built for deeper and long-reach drilling in cast iron and steel workpieces, including structural, fabricated, and maintenance-repair contexts. Its straight-cylindrical shank seats in standard drill chucks without adapter hardware, making it a direct fit for most drill presses, magnetic drills, and hand-held heavy-duty drills. The extended 8-inch overall length gives access to confined or deep-bore locations that standard-length jobber bits cannot address. Right-hand cutting direction is conventional for nearly all drilling setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.4062-inch (13\/32 inch) diameter with a diameter tolerance of +0.0000 to -0.0010 inches for consistent hole sizing\u003c\/li\u003e\n  \u003cli\u003e8-inch overall length and 5.5-inch flute length for deep-reach and long-reach drilling\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web thinning for reduced thrust and easier entry\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction with oxide finish for general-purpose ferrous drilling\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank compatible with standard drill chucks\u003c\/li\u003e\n  \u003cli\u003e2-flute regular spiral design promotes efficient chip evacuation in deep-bore conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose extra length drill bit for right-hand drilling of cast iron and steel workpieces. Compatible with standard drill chucks accepting a 13\/32-inch straight-cylindrical shank. Part of the Cleveland Series 950E extra length drill bit line.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and operated by machinists, pipefitters, ironworkers, and maintenance technicians using drill presses, magnetic base drills, or heavy-duty hand drills. Secure the straight-cylindrical shank firmly in the chuck before operation and confirm the workpiece is clamped or fixtured to prevent movement. Use cutting fluid or cutting oil when drilling cast iron or steel at extended depths to manage heat buildup and extend bit life. Inspect the cutting edges before use and do not force a worn or damaged bit.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.4062 inches (13\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 13\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 950E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, ANSI, California Proposition 65\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C09675\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51695573270834,"sku":"C09675","price":56.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c7bbeaa782005f1ade84226136b68d75.jpg?v=1788336583","url":"https:\/\/voomisupply.com\/products\/cleveland-c09675-extra-length-drill-bit-0-4062-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}