{"product_id":"cleveland-c08746-taper-length-drill-bit-letter-e-hss","title":"Cleveland C08746 Taper Length Drill Bit Letter E Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C08746 is a taper length, straight-shank drill bit designed for general-purpose drilling in metalworking applications. Built from high-speed steel with a coated finish, it carries a 118-degree standard point angle and a web-thinned, tapered web configuration that reduces thrust and improves chip clearance at entry. The bit measures 0.25 inches (Letter E) in diameter with a flute length of 3.75 inches and an overall length of 6.125 inches. The right-hand spiral flute promotes efficient chip evacuation during through-hole and deep drilling passes. This bit is suited for use by machinists, maintenance technicians, and metal fabricators working with ferrous and non-ferrous stock.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is built for drilling alloy steel, carbon steel, and cast iron. The taper length body — longer than a jobber bit but shorter than an extra-long series — gives added reach for setups where a standard jobber length falls short, such as drilling through structural members, flanges, or offset fixture work. The straight shank fits standard drill chucks without adapters. It meets ASME B94.11M and DIN 340 dimensional standards, making it a reliable fit for shops running to print tolerances. The 2510 series positions it as a general-purpose workhorse for production and maintenance drilling alike.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel construction with coated finish for extended wear resistance\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle suitable for general-purpose metal drilling\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web reduces drilling thrust and improves bit entry\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute promotes clean chip evacuation\u003c\/li\u003e\n  \u003cli\u003eTaper length body provides additional reach over standard jobber bits\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M and DIN 340 standards; diameter tolerance +0.0000 to -0.0007 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard drill chucks accepting a 0.25-inch straight shank. Rated for drilling alloy steel, carbon steel, and cast iron in general-purpose metalworking applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and operated by machinists or maintenance technicians using a drill press, hand drill, or milling machine equipped with a keyed or keyless chuck. Secure the shank fully in the chuck before operation and verify runout if tolerance-critical holes are required. Use appropriate cutting fluid for steel applications to extend tool life and maintain hole quality. Inspect the cutting edges before each use and replace the bit if chipping or excessive wear is present.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 0.25 inches (Letter E, 1\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.75 inches (95.25 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches (6.35 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.375 inches (60.32 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0007 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Carbon Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 340\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2510\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C08746\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51720465350962,"sku":"C08746","price":22.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fa70677eec84271f17634d30025ba005_27d01d70-004d-41d2-b824-aebb97ab3d08.jpg?v=1788564446","url":"https:\/\/voomisupply.com\/products\/cleveland-c08746-taper-length-drill-bit-letter-e-hss","provider":"Voomi Supply","version":"1.0","type":"link"}