{"product_id":"cle-line-c66001-cobalt-jobber-drill-bit-1-16-in","title":"Cle-line C66001 Cobalt Jobber Drill Bit 1\/16 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLE-LINE C66001 is a cobalt jobber-length drill bit with a titanium nitride (TiN) coating, designed for high-speed drilling in hard and abrasive materials. It measures 1\/16 inch in diameter with a 1-7\/8 inch overall length and a 7\/8 inch flute length. The 135-degree split point reduces walking on entry and requires less thrust than a standard 118-degree point. Web thinning further reduces cutting resistance at the center of the bit. This drill is built for machinists, maintenance technicians, and tool-and-die professionals who need consistent performance in tough materials at small diameters.\u003c\/p\u003e\u003cp\u003eThe C66001 is suited for drilling alloy steel, carbon steel, cast iron, aluminum, and other non-ferrous metals in general-purpose production and maintenance applications. The straight cylindrical shank fits standard drill chucks without modification. The regular spiral flute geometry and right-hand cutting direction make it compatible with conventional drill press and hand-drill setups. It is a single-end, two-flute design in the 1501-TT series, intended for situations where standard high-speed steel bits wear too quickly or fail to hold an edge.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt steel construction for improved heat and wear resistance in hard materials\u003c\/li\u003e\n\u003cli\u003eTiN coating extends tool life and reduces surface friction during cutting\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces drill walking and entry thrust requirements\u003c\/li\u003e\n\u003cli\u003eWeb-thinned tapered web lowers cutting resistance at the chisel edge\u003c\/li\u003e\n\u003cli\u003eRight-hand spiral flute clears chips efficiently during drilling\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in alloy steel, carbon steel, cast iron, aluminum, and non-ferrous metals. Fits any standard drill chuck accepting a 0.0625 inch straight shank. Part of the CLE-LINE 1501-TT series. Conforms to ANSI specification standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall and remove drill bits only after the drill press or power tool has been fully de-energized and brought to a complete stop. Use an appropriate chuck key or keyless chuck mechanism to secure the shank before operation. Verify that the selected cutting speed and feed rate are appropriate for the workpiece material and bit diameter. Wear eye protection and follow applicable shop safety practices when operating rotating cutting tools.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0625 inch (1.59 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1501-TT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLE-LINE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C66001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLE-LINE","offers":[{"title":"Default Title","offer_id":52012804342066,"sku":"C66001","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7f39e51de1c6a1a60d2c2c649f1c53fe_942a65fd-0dde-4ed5-9c7d-b792dbd04761.jpg?v=1790005714","url":"https:\/\/voomisupply.com\/products\/cle-line-c66001-cobalt-jobber-drill-bit-1-16-in","provider":"Voomi Supply","version":"1.0","type":"link"}