{"product_id":"cle-line-c23631-aircraft-extension-drill-bit-7-32-in","title":"Cle-line C23631 Aircraft Extension Drill Bit 7\/32 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLE-LINE C23631 is a 7\/32 inch diameter aircraft extension drill bit engineered for reach-critical drilling applications in metal fabrication, aerospace maintenance, and structural assembly work. Built from high-speed steel with an oxide finish, it features a 135-degree split point that self-centers on contact, reducing the need for a center punch and minimizing walking on hard or curved surfaces. The 6-inch overall length gives technicians the clearance needed to access recessed or obstructed hole locations that standard-length bits cannot reach. Two right-hand spiral flutes with a web-thinned, tapered web configuration promote efficient chip evacuation during extended drilling passes.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for drilling through aluminum, mild steel, and similar materials in aircraft skin repair, structural panel work, and general-purpose metalworking where extended reach is required. The straight cylindrical shank seats securely in standard drill chucks and right-angle drill adapters commonly used in sheet metal and MRO applications. With a 2.5-inch flute length and a close-tolerance shank diameter of 0.2188 inches, the C23631 maintains alignment in both handheld and drill-press setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point with self-centering geometry reduces walking and eliminates center-punch step\u003c\/li\u003e\n  \u003cli\u003e6-inch overall length provides extended reach for obstructed or recessed drilling locations\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction with oxide finish for corrosion resistance and reduced friction\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web configuration improves chip flow and lowers thrust required\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flutes (2 flutes) with 2.5-inch flute length for efficient swarf removal\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank at 0.2188 inches diameter fits standard drill chucks and adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose aircraft extension drill bit compatible with standard three-jaw drill chucks and right-angle drill attachments that accept a straight cylindrical shank at 7\/32 inch (0.2188 inches) diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by qualified machinists, aircraft maintenance technicians (AMT), or experienced metalworkers following applicable shop and regulatory procedures. Secure the shank fully in the chuck and verify runout before drilling. Use appropriate cutting fluid for the workpiece material to extend bit life and improve hole finish. Inspect the cutting edges and point before each use and remove from service if chipping or excessive wear is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 7\/32 inch (0.2188 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 7\/32 inch (0.2188 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0007 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelf-Centering\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1803\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.45 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLE-LINE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C23631\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLE-LINE","offers":[{"title":"Default Title","offer_id":51971405775154,"sku":"C23631","price":77.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d52410f7fad479ca66a907a11c0b0b9e.jpg?v=1789956935","url":"https:\/\/voomisupply.com\/products\/cle-line-c23631-aircraft-extension-drill-bit-7-32-in","provider":"Voomi Supply","version":"1.0","type":"link"}