{"product_id":"chicago-latrobe-68922-jobber-drill-bit-11-32-in-hss","title":"Chicago-latrobe 68922 Jobber Drill Bit 11\/32 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CHICAGO-LATROBE 68922 is a jobber-length drill bit engineered for heavy-duty drilling in steel alloy and similar ferrous materials. Built from high speed steel with a bright uncoated finish, this bit features a 135-degree split point that reduces walking on contact and lowers the thrust needed to start the hole. The parabolic flute geometry clears chips aggressively, making it well suited for deeper holes where chip packing is a concern. At 11\/32 inch (0.3438 inch) in diameter with an overall length of 4-3\/4 inches and a flute length of 3-7\/16 inches, the 68922 is part of CHICAGO-LATROBE's Series 150DH heavy-duty line. It is installed by machinists, pipefitters, HVAC technicians, and general trade professionals working in metal fabrication or mechanical installations.\u003c\/p\u003e\n\u003cp\u003eThe 68922 fits standard drill chucks and is intended for use in handheld drills, drill presses, and CNC equipment where a straight-cylindrical shank is accepted. Primary workpiece material is steel alloy, though the HSS construction and bright finish make it appropriate for a range of structural and sheet metals encountered in mechanical, HVAC, plumbing, and electrical trade work. The web-thinned, tapered web design reduces cutting resistance, which is particularly valuable when drilling in tight or repetitive production scenarios.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point reduces bit walking and lowers entry thrust on hard materials\u003c\/li\u003e\n  \u003cli\u003eParabolic flute profile promotes rapid chip evacuation in deep-hole drilling\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction handles steel alloy and ferrous workpieces under sustained use\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned tapered web reduces cutting resistance and heat buildup at the tip\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard keyed and keyless chucks without modification\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish allows easy visual inspection for wear or damage between uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in any drill press, handheld drill, or CNC spindle accepting an 11\/32 inch straight-cylindrical shank. Rated for steel alloy as the primary workpiece material per Series 150DH specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the shank fully in a properly sized chuck before operation and confirm the chuck is tightened to prevent slippage. Always wear appropriate eye protection and secure the workpiece to prevent rotation. When drilling steel alloy, use a cutting fluid or coolant to extend bit life and reduce thermal stress on the cutting edge. Inspect the split point and flute edges for chipping or dullness before each use and replace the bit if deformation is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 11\/32 inch (0.3438 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3-7\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 11\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.3125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.0000 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 150DH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CHICAGO-LATROBE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 68922\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CHICAGO-LATROBE","offers":[{"title":"Default Title","offer_id":51750595559730,"sku":"68922","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/47d8fa2c62ab5437f5a17f29218a3085.jpg?v=1788917149","url":"https:\/\/voomisupply.com\/products\/chicago-latrobe-68922-jobber-drill-bit-11-32-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}