{"product_id":"chicago-latrobe-68918-jobber-drill-bit-9-32-in-hss","title":"Chicago-latrobe 68918 Jobber Drill Bit 9\/32 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CHICAGO-LATROBE 68918 is a jobber-length drill bit designed for heavy-duty drilling in steel alloy and similar ferrous materials. It is manufactured from high-speed steel with a bright, uncoated finish and features a 135-degree split point that reduces walking and decreases the thrust needed to start a hole. The parabolic flute geometry improves chip evacuation, which matters most in deep-hole applications where chip packing can cause tool breakage. At 4.25 inches overall length with a 9\/32-inch diameter, this bit fits standard drill chucks and is sized for typical structural and fabrication work performed by HVAC, plumbing, and electrical tradespeople.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for general trade drilling tasks including sheet metal penetrations, structural steel, angle iron, unistrut, and similar ferrous substrates encountered in mechanical and electrical installation work. The straight-cylindrical shank accepts any standard three-jaw chuck. The Series 150DH designation places this bit in CHICAGO-LATROBE's heavy-duty jobber line, intended for production and field drilling where bit life and hole quality are both priorities. It is sold individually and is appropriate for use in corded drills, right-angle drills, and drill presses.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point reduces walk-off and lowers entry thrust on hard materials\u003c\/li\u003e\n  \u003cli\u003eParabolic flute profile accelerates chip removal and reduces heat buildup in deep holes\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction provides good wear resistance across common ferrous workpieces\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web design balances cutting strength with reduced cutting force\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard three-jaw drill chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish allows visual wear inspection and suits general-purpose use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit for use in standard three-jaw chucks on corded drills, right-angle drills, and drill presses. Primary workpiece material is steel alloy; the split point geometry also performs in other ferrous metals commonly encountered in trade work.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the workpiece before drilling to prevent rotation and ensure a clean, accurate hole. Use appropriate cutting fluid or lubricant when drilling steel alloy to extend bit life and maintain hole tolerance. Verify chuck is fully tightened and the bit is running true before engaging the workpiece. Wear appropriate eye protection in compliance with applicable job-site safety requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 9\/32 inches (0.2812 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2-15\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 9\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.3125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 150DH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CHICAGO-LATROBE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 68918\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CHICAGO-LATROBE","offers":[{"title":"Default Title","offer_id":51753210249522,"sku":"68918","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e7ca62496df2da4971f28a05d42412a3.jpg?v=1788933928","url":"https:\/\/voomisupply.com\/products\/chicago-latrobe-68918-jobber-drill-bit-9-32-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}