{"product_id":"chicago-latrobe-55466-reduced-shank-drill-bit-1-1-32-in","title":"Chicago-latrobe 55466 Reduced Shank Drill Bit 1-1\/32 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CHICAGO-LATROBE 55466 is a reduced shank twist drill bit designed for general-purpose portable drilling in a wide range of materials. It features a 1-1\/32 inch cutting diameter paired with a 1\/2 inch straight-cylindrical shank, allowing the bit to be chucked in standard 1\/2 inch drill chucks despite its larger cutting diameter. Constructed from high speed steel, the 55466 delivers consistent performance across wood, carbon steel, alloy steel, and cast iron. The 118-degree standard point angle suits most common drilling applications without requiring specialized grinding. A coated finish helps extend service life under regular use conditions. This bit is part of the CHICAGO-LATROBE Series 190 lineup and is sized and toleranced for trade and industrial use.\u003c\/p\u003e\n\u003cp\u003eThe 55466 is suited for portable drilling operations where a larger-diameter hole is needed but chuck capacity is limited to 1\/2 inch. Typical applications include construction, fabrication, and maintenance work involving wood framing, structural steel, cast iron pipe flanges, and general metalwork. The right-hand spiral flute geometry evacuates chips efficiently during through-hole drilling. Machinists, pipefitters, ironworkers, and general maintenance technicians commonly use reduced shank bits like this one when working with portable drills or drill presses equipped with 1\/2 inch chucks.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/32 inch cutting diameter with a reduced 1\/2 inch straight-cylindrical shank for use in standard 1\/2 inch chucks\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction for durability across wood, alloy steel, carbon steel, and cast iron\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle for general-purpose drilling without regrinding\u003c\/li\u003e\n  \u003cli\u003e6 inch overall length with a 3-1\/8 inch flute length for adequate chip clearance\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with regular spiral, 2-flute geometry for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance of +0.0000 to -0.0015 inches for consistent, on-size holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in portable drills and drill presses with a 1\/2 inch chuck capacity. Compatible with wood, alloy steel, carbon steel, and cast iron workpieces as specified by the manufacturer for the Series 190 line.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the 1\/2 inch shank firmly in a properly rated drill chuck before use. Ensure the workpiece is clamped or fixtured to prevent movement during drilling. When drilling metals such as alloy steel or cast iron, use appropriate cutting fluid or coolant if the setup permits, and reduce feed pressure as the bit breaks through to avoid grabbing. Inspect the cutting edges for wear before each use and remove the bit from service if chipping or excessive dulling is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1-1\/32 inches (1.0312 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3-1\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0015 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Length Type\u003c\/strong\u003e: Reduced Shank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 190\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Wood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Alloy Steel, Carbon Steel, Cast Iron, Wood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant\u003c\/strong\u003e: Not required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Portable Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CHICAGO-LATROBE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 55466\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CHICAGO-LATROBE","offers":[{"title":"Default Title","offer_id":51731267092786,"sku":"55466","price":91.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1ecf958dc40ae9b7695f73bacee4fd00.jpg?v=1788729028","url":"https:\/\/voomisupply.com\/products\/chicago-latrobe-55466-reduced-shank-drill-bit-1-1-32-in","provider":"Voomi Supply","version":"1.0","type":"link"}