{"product_id":"chicago-latrobe-49911-drill-bit-set-13-pc-hss-jobber","title":"Chicago-latrobe 49911 Drill Bit Set 13 Pc Hss Jobber","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CHICAGO-LATROBE 49911 is a 13-piece jobber length drill bit set designed for general-purpose metalworking and multipurpose drilling applications. The set is manufactured from high speed steel (HSS) with a bright, uncoated finish, and features a standard 118-degree split point angle for accurate starts on common metals and materials. All bits use a straight shank for compatibility with standard drill chucks. Coverage runs from 1\/16 inch through 1\/4 inch in 1\/64-inch step increments. Right-hand cutting direction is standard across all 13 sizes. The bits are stored in a metal or plastic index case for organized jobsite access. This set is a staple for HVAC, plumbing, and electrical trades requiring consistent through-hole drilling in sheet metal, strut, and light structural material.\u003c\/p\u003e\n\u003cp\u003eThe 49911 set is suited to residential and light commercial service work where a compact, inch-sized range of drill bits is needed on a daily basis. The 1\/64-inch step increments allow tradespeople to drill precisely sized holes for wire runs, pipe hangers, duct flanges, and equipment mounting brackets. The jobber length profile provides a practical reach-to-rigidity balance for hand drills and drill presses alike. Licensed contractors and service technicians who carry a general-purpose drill set will find the 13-piece range covers the most frequently called-upon sizes in field work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e13-piece jobber length set covering 1\/16 inch to 1\/4 inch in 1\/64-inch increments\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction rated for general-purpose metalworking\u003c\/li\u003e\n  \u003cli\u003eStandard 118-degree point angle for reliable bit engagement on common metals\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish — no coating to chip or peel under repeated use\u003c\/li\u003e\n  \u003cli\u003eStraight shank fits standard keyed and keyless drill chucks\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction; stored in an indexed metal or plastic case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose inch-series jobber length drill bit set for use with standard 3-jaw drill chucks on portable drills and bench drill presses in metalworking and multipurpose trade applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of this drill bit set requires no special tooling beyond a compatible drill with a properly sized chuck. Always secure the workpiece before drilling and wear appropriate eye protection. Verify the correct bit size against the required hole diameter before beginning. When drilling into energized panels or live systems, de-energize and lock out the circuit in accordance with applicable electrical codes before proceeding.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Pieces\u003c\/strong\u003e: 13\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size Range\u003c\/strong\u003e: 1\/16 inch to 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStep Increments\u003c\/strong\u003e: 1\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Size\u003c\/strong\u003e: 0.06 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Size\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Length Type\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 150D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStorage Unit Type\u003c\/strong\u003e: Case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStorage Unit Material\u003c\/strong\u003e: Metal or Plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Metalworking, Multipurpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CHICAGO-LATROBE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 49911\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CHICAGO-LATROBE","offers":[{"title":"Default Title","offer_id":51744614678834,"sku":"49911","price":55.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6d288656a0508e9b14e60e3245bb6308.jpg?v=1788859031","url":"https:\/\/voomisupply.com\/products\/chicago-latrobe-49911-drill-bit-set-13-pc-hss-jobber","provider":"Voomi Supply","version":"1.0","type":"link"}