{"product_id":"chicago-latrobe-44210-5-32-inch-hss-jobber-drill-bit","title":"Chicago-latrobe 44210 5\/32 Inch Hss Jobber Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CHICAGO-LATROBE 44210 is a jobber-length drill bit designed for general-purpose drilling in non-ferrous metals and similar materials. Built from high-speed steel (HSS) with a bright, uncoated finish, this bit runs a standard 118-degree point angle and a right-hand spiral flute configuration. The straight-cylindrical shank measures 5\/32 inches in diameter, and the overall length comes in at 3.125 inches with a 2-inch flute length. It follows the Series 150D design and meets DIN 338 standards. Licensed trades and industrial users will find this bit suited for production and field drilling tasks where consistent sizing and general-purpose performance are required.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for use in non-ferrous metal applications including aluminum, brass, copper, and similar materials. The jobber-length format provides a practical balance between reach and rigidity, making it a common choice for hand-held drills, drill presses, and CNC setups in light manufacturing, HVAC fabrication, electrical rough-in, and plumbing sheet-metal work. The 5\/32-inch diameter targets hole sizes in the 0.1500 to 0.2000 decimal-inch range. The web-thinned, tapered web configuration reduces entry resistance and improves chip evacuation on through-hole drilling tasks.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh-speed steel construction for durability across general-purpose drilling applications\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle for use in non-ferrous metals\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — no added coating to chip or delaminate\u003c\/li\u003e\n\u003cli\u003eRight-hand cut with regular spiral fluting for efficient chip removal\u003c\/li\u003e\n\u003cli\u003eWeb-thinned, tapered web design reduces thrust and improves bit entry\u003c\/li\u003e\n\u003cli\u003eMeets DIN 338 dimensional standards for consistent sizing across tooling systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber-length drill bit for use in standard 3-jaw chucks, keyed drill chucks, and CNC tool holders accepting a 5\/32-inch straight-cylindrical shank. Suitable for non-ferrous metal drilling applications across residential and light commercial trade work.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed and removed by a licensed technician or trained tradesperson using a standard drill chuck key or keyless chuck system. Secure the shank fully into the chuck before operation and confirm the bit runs true with no visible wobble. When drilling metals, use appropriate cutting fluid or lubricant to extend bit life and maintain hole quality. Inspect the cutting edges before each use and replace bits that show chipping, heat discoloration, or dimensional wear.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5\/32 inches (0.1562 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright, Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 150D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0007 to 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0133 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CHICAGO-LATROBE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 44210\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CHICAGO-LATROBE","offers":[{"title":"Default Title","offer_id":51730965922098,"sku":"44210","price":36.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cd60ccb29209209dca91cc23ad239e93.jpg?v=1788725407","url":"https:\/\/voomisupply.com\/products\/chicago-latrobe-44210-5-32-inch-hss-jobber-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}