{"product_id":"charlotte-pipe-pvc04300b0800-sch-40-foam-core-dwv-pipe-3x20","title":"Charlotte Pipe PVC04300B0800 Sch 40 Foam Core Dwv Pipe 3x20","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe Charlotte Pipe Foundry PVC04300B0800 is a 3-inch Schedule 40 foam core PVC pipe with a bell end, designed for drain, waste, and vent (DWV) applications in non-pressure systems. The foam core construction reduces overall pipe weight while maintaining the structural integrity required by Schedule 40 standards. At 20 feet per length, this pipe is well suited for residential and light commercial drainage rough-in work. It meets ASTM F-891 and NSF Standard 14, two benchmarks that inspectors and AHJs routinely check on DWV installations.\u003c\/p\u003e\n\u003cp\u003eThis pipe is used in residential and light commercial DWV systems for drain lines, waste stacks, and vent piping where pressure is not a factor. The bell end simplifies solvent-weld joining in the field, eliminating the need for a separate coupling at each joint. Plumbers working on new construction, remodels, or additions will find the 20-foot length efficient for long horizontal drain runs and vertical stack segments. It is not rated for pressure service or outdoor UV-exposed applications without additional protection.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3-inch diameter, 20-foot length — efficient for long drain and vent runs with fewer joints\u003c\/li\u003e\n  \u003cli\u003eSchedule 40 foam core construction reduces weight while meeting standard wall-thickness performance requirements\u003c\/li\u003e\n  \u003cli\u003eBell end design allows direct solvent-weld joining without a separate coupling\u003c\/li\u003e\n  \u003cli\u003eRated for DWV non-pressure applications per ASTM F-891\u003c\/li\u003e\n  \u003cli\u003eNSF Standard 14 listed — meets requirements for plastic piping systems used in plumbing\u003c\/li\u003e\n  \u003cli\u003eSold in a package quantity of 50 lengths, suitable for new construction jobsite orders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style DWV replacement and new-installation pipe compatible with standard Schedule 40 PVC DWV fittings, couplings, and solvent-weld connections sized for 3-inch pipe in non-pressure drain, waste, and vent systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local codes. Turn off water supply and confirm the system is depressurized before cutting into any existing line. Use a fine-tooth saw or PVC pipe cutter for clean square cuts, deburr all cut ends, and apply a listed PVC primer followed by solvent cement rated for Schedule 40 PVC DWV service. This pipe is not rated for pressure service — do not use in supply or pressurized piping applications.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Diameter\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Length\u003c\/strong\u003e: 20 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule\u003c\/strong\u003e: Schedule 40\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e: Foam Core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Bell End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: DWV — Non-Pressure Only\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: PVC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 50 lengths per package\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 825.24 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASTM F-891\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: NSF Standard 14\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: Charlotte Pipe Foundry Co.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PVC04300B0800\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CHARLOTTE PIPE","offers":[{"title":"Default Title","offer_id":51561528099122,"sku":"PVC04300B0800","price":2405.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/093f6cf79ac3e9ba4236c26c5cf1546e.jpg?v=1786465171","url":"https:\/\/voomisupply.com\/products\/charlotte-pipe-pvc04300b0800-sch-40-foam-core-dwv-pipe-3x20","provider":"Voomi Supply","version":"1.0","type":"link"}