{"product_id":"charlotte-pipe-pvc-107-4x2-pvc-dwv-flush-bushing-4x2","title":"Charlotte Pipe PVC-107-4X2 Pvc Dwv Flush Bushing 4x2","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CHARLOTTE PIPE PVC-107-4X2 is a PVC DWV flush bushing designed to reduce a 4-inch hub connection down to a 2-inch spigot connection in drain, waste, and vent piping systems. This fitting is rated for non-pressure, gravity-fed waste elimination service and is not intended for pressurized lines. It handles continuous service temperatures up to 140 degrees F. The flush bushing profile keeps the fitting seated flush within the hub, simplifying tight-clearance installations. Licensed plumbers and pipefitters install this fitting using standard solvent-cement joining procedures compatible with schedule 40 PVC DWV systems.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in residential and light commercial DWV rough-in applications where a line reduction is needed inline with a hub-end fitting or pipe. Typical scenarios include branch reductions in drain stacks, vent piping transitions, and waste line size changes. The spigot end inserts directly into a standard 4-inch PVC DWV hub, and the 2-inch hub end accepts standard 2-inch PVC DWV spigot pipe or fittings. Installation follows standard solvent-cement procedures without the need for specialty tools.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush bushing design seats fully inside the mating hub for low-profile installation in tight spaces\u003c\/li\u003e\n  \u003cli\u003eRated for non-pressure DWV service in gravity-fed drain, waste, and vent systems\u003c\/li\u003e\n  \u003cli\u003eMaximum service temperature of 140 degrees F\u003c\/li\u003e\n  \u003cli\u003eCompatible with solvent-cement joining — no threading or specialty tools required\u003c\/li\u003e\n  \u003cli\u003eLightweight PVC construction simplifies handling and cutting on the job\u003c\/li\u003e\n  \u003cli\u003eManufactured in the USA by Charlotte Pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard fitting for residential and light commercial PVC DWV piping systems requiring a 4-inch to 2-inch spigot-by-hub reduction.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local codes. Shut off water supply and verify the line is fully drained before beginning any fitting work. Clean and dry both mating surfaces before applying PVC solvent cement; follow cement manufacturer's cure time requirements before restoring flow. This fitting is not rated for pressure applications or for use with fluids exceeding 140 degrees F.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: PVC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Flush Bushing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Spigot x Hub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Size\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutlet Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: DWV (Drain, Waste, Vent) — Non-Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 140 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem Type\u003c\/strong\u003e: Gravity-Fed Waste Elimination\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 611942032662\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CHARLOTTE PIPE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PVC-107-4X2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CHARLOTTE PIPE","offers":[{"title":"Default Title","offer_id":51383041950002,"sku":"PVC-107-4X2","price":30.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312672212.png?v=1782586479","url":"https:\/\/voomisupply.com\/products\/charlotte-pipe-pvc-107-4x2-pvc-dwv-flush-bushing-4x2","provider":"Voomi Supply","version":"1.0","type":"link"}