{"product_id":"cerrobrass-201a-8b-barbed-hose-fitting-1-4-npt-x-1-2-id","title":"Cerrobrass 201A-8B Barbed Hose Fitting 1\/4 Npt X 1\/2 Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CERROBRASS 201A-8B is a brass barbed hose fitting configured as a male connector, designed to create a secure transition between a threaded pipe connection and a flexible hose line. It features a 1\/4 inch NPTF male threaded end and accepts 1\/2 inch inside diameter hose on the barbed end. The barb geometry grips the hose interior to resist pull-off under pressure and vibration. Rated for use across a wide temperature range, this fitting is well suited for fluid transfer applications in HVAC, plumbing, and light industrial systems. Plumbers, pipefitters, and HVAC technicians install this type of connector where a rigid threaded supply transitions to flexible hose.\u003c\/p\u003e\n\u003cp\u003eThe 201A-8B is used in residential and light commercial systems where a 1\/4 inch NPT male port must connect to a 1\/2 inch ID flexible hose. Typical applications include condensate drain lines, cooling equipment, and general-purpose fluid transfer where hose barb connections are preferred over compression or flare fittings. The all-brass construction makes it compatible with water, many glycol-based fluids, and other media commonly handled in trade plumbing and HVAC work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4 inch NPTF male threaded end for secure, leak-resistant engagement with standard NPT ports\u003c\/li\u003e\n  \u003cli\u003e1\/2 inch ID hose barb end sized for push-on hose attachment with clamp retention\u003c\/li\u003e\n  \u003cli\u003eBrass construction provides corrosion resistance and durability in wet or humid environments\u003c\/li\u003e\n  \u003cli\u003eRated from -40 degrees F to 160 degrees F for broad temperature service range\u003c\/li\u003e\n  \u003cli\u003eCompact, single-piece design with no moving parts or seals to replace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard male hose barb connector for systems using 1\/4 inch NPT threaded ports and 1\/2 inch inside diameter flexible hose, consistent with typical HVAC, plumbing, and fluid transfer installations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a licensed plumber or qualified HVAC technician. Shut off fluid supply and relieve system pressure before removing or installing any fitting. Apply thread sealant tape or compound to the NPTF male threads per IPC and IFGC guidelines before tightening. Secure the hose to the barb with an appropriately sized hose clamp to maintain pull-off resistance at rated operating conditions.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Male Hose Barb Connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBarb Size\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded x Hose Barb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 160 degrees F (71 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F (-40 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 40141734\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CERROBRASS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 201A-8B\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CERROBRASS","offers":[{"title":"Default Title","offer_id":67912494088498,"sku":"201A-8B","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ba37b4fcd02d9e73f5ea92440952fd94.jpg?v=1791235285","url":"https:\/\/voomisupply.com\/products\/cerrobrass-201a-8b-barbed-hose-fitting-1-4-npt-x-1-2-id","provider":"Voomi Supply","version":"1.0","type":"link"}