{"product_id":"cerro-flow-products-1095-type-m-copper-tube-1-1-4-in-20-ft","title":"Cerro Flow Products 1095 Type M Copper Tube 1-1\/4 in 20 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CERRO FLOW PRODUCTS 1095 is a Type M, light-wall, hard-temper copper tube manufactured from C12200 copper to ASTM B88 standards. It measures 1-1\/4 inch nominal size with an outside diameter of 1.375 inches, an inside diameter of 1.291 inches, and a wall thickness of 0.042 inches. Each straight length runs 20 feet and weighs 12.69 pounds. Drawn construction produces consistent wall thickness and a smooth interior bore. The red color marking identifies it as Type M at a glance. Licensed plumbers and pipefitters install this tube in residential and light commercial systems for general plumbing, hydronic heating, and DWV applications.\u003c\/p\u003e\n\u003cp\u003eThis tube is suited for general plumbing and heating service, drain-waste-vent installations, and other light-pressure applications in both residential and commercial construction. Hard temper makes it well-suited for straight runs where rigid, unsupported spans are required. It joins with standard sweat, press, or push-fit fittings using capillary or mechanical methods, eliminating the need for threading. Its drawn bore and consistent wall dimensions support clean, leak-free joints with standard copper fittings. Contractors working on new construction and remodel projects routinely specify Type M for domestic water distribution and low-pressure hydronic loops.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType M light-wall designation per ASTM B88 — thinner wall reduces material weight and cost versus Type L or Type K\u003c\/li\u003e\n  \u003cli\u003eC12200 phosphorus-deoxidized copper construction provides strong corrosion and scaling resistance\u003c\/li\u003e\n  \u003cli\u003eHard temper holds shape on straight runs without continuous support at the short intervals required for soft temper\u003c\/li\u003e\n  \u003cli\u003eLead-free material meets EPA and ANSI\/NSF 61 requirements for potable water contact\u003c\/li\u003e\n  \u003cli\u003eRed color stripe provides quick visual identification as Type M in the field\u003c\/li\u003e\n  \u003cli\u003e100 percent recyclable copper — no material degradation through recycling cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for general plumbing, heating, and DWV applications where Type M copper tube is specified. Meets UL, CSA, IAPMO, WQA, ANSI\/NSF 61, and EPA standards, making it acceptable under virtually all major North American plumbing codes for light-pressure service.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with the applicable local plumbing code, IPC, or IFGC requirements. Shut off and drain the water supply before cutting into any existing line. Use a sharp tube cutter to produce a clean, square cut, and ream the cut end fully before fluxing and soldering or assembling press fittings. Hard-temper tube should not be bent in the field; use fittings to change direction.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Size\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1.291 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall Thickness\u003c\/strong\u003e: 0.042 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 20 feet straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 12.69 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: C12200 Copper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: ASTM B88\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: M, Light Wall\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemper\u003c\/strong\u003e: Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProcess\u003c\/strong\u003e: Drawn\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Red\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: General Plumbing and Heating, DWV and Other Light Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL, CSA, IAPMO, WQA, ANSI\/NSF 61, EPA Lead-Free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CERRO FLOW PRODUCTS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1095\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CERRO FLOW PRODUCTS","offers":[{"title":"Default Title","offer_id":51267950674226,"sku":"01095","price":392.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308912323.jpg?v=1780695347","url":"https:\/\/voomisupply.com\/products\/cerro-flow-products-1095-type-m-copper-tube-1-1-4-in-20-ft","provider":"Voomi Supply","version":"1.0","type":"link"}