{"product_id":"cerro-flow-products-1082-type-m-hard-copper-tubing-1-in","title":"Cerro Flow Products 1082 Type M Hard Copper Tubing 1 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CERRO FLOW PRODUCTS 1082 is a 1-inch nominal, Type M hard-temper copper tube drawn from C12200 copper and supplied in 20-foot straight lengths. Conforming to ASTM B88, this light-wall tube carries an outside diameter of 1.125 inches, an inside diameter of 1.055 inches, and a wall thickness of 0.035 inches. It is lead-free and certified to NSF\/ANSI 61, making it suitable for domestic potable water service as well as below-grade facility water lines. Licensed plumbers and HVAC-R technicians install this product in residential, commercial, and industrial piping systems.\u003c\/p\u003e\n\u003cp\u003eType M hard copper tubing in this nominal size is commonly used for general plumbing and heating supply lines, drainage, waste, and vent (DWV) runs, and other light-pressure applications. The hard temper allows for straight runs between fittings without additional support at close intervals, and the 20-foot length reduces the number of joints required on longer runs. This tubing is appropriate for both interior rough-in work and below-grade installations where approved for that use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLead-free C12200 copper drawn to ASTM B88 for consistent wall dimensions and metallurgical integrity\u003c\/li\u003e\n  \u003cli\u003eType M light-wall profile with 0.035-inch wall thickness reduces material weight while meeting pressure requirements for typical plumbing service\u003c\/li\u003e\n  \u003cli\u003eNSF\/ANSI 61 certified and WQA, IAPMO, UL, and CSA listed for broad code acceptance\u003c\/li\u003e\n  \u003cli\u003eHard temper allows rigid, straight installation runs without the need for continuous support along the tube\u003c\/li\u003e\n  \u003cli\u003eApproved for domestic water and below-grade facility water service\u003c\/li\u003e\n  \u003cli\u003e20-foot straight length minimizes field cuts and solder joints on long runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 1-inch copper sweat, press, and compression fittings in general plumbing, heating, drainage, waste, vent, and other light-pressure piping applications in residential, commercial, and industrial installations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local codes. Shut off the water supply and relieve system pressure before cutting or joining tubing. Use a sharp tube cutter to ensure a clean, square cut, and ream the cut end before soldering or pressing to remove any burr that could restrict flow or compromise the joint. Type M hard copper is not recommended for medical gas or high-pressure steam service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Size\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1.055 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall Thickness\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 20 feet straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8.6 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Type M Light Wall\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemper\u003c\/strong\u003e: Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: C12200 Copper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: ASTM B88\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProcess\u003c\/strong\u003e: Drawn\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead-Free\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Red\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: NSF\/ANSI 61, WQA, IAPMO, UL, CSA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: General Plumbing and Heating, Drainage Waste and Vent, Light Pressure Use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CERRO FLOW PRODUCTS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1082\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CERRO FLOW PRODUCTS","offers":[{"title":"Default Title","offer_id":51268786979122,"sku":"01082","price":179.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308909925.jpg?v=1780705763","url":"https:\/\/voomisupply.com\/products\/cerro-flow-products-1082-type-m-hard-copper-tubing-1-in","provider":"Voomi Supply","version":"1.0","type":"link"}