{"product_id":"carpenter-paterson-0-0001-clevis-hanger-6-inch-pipe","title":"Carpenter Paterson 0.0001 Clevis Hanger 6 Inch Pipe","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CARPENTER PATERSON 0.0001 is a rod-mount clevis hanger designed to support non-insulated, stationary pipe lines from above. Built from carbon steel with an electro-galvanized finish, it carries a load rating of 1,940 pounds and is rated for temperatures up to 450 degrees F. The hanger provides approximately 1 inch to 1.5 inches of vertical adjustment after the pipe is set in place. The lower nut adjusts the pipe line to the proper elevation, while the top nut locks the assembly against loosening caused by vibration. Both nuts are not furnished and must be sourced separately. Licensed pipefitters and plumbing contractors install this hanger in commercial and industrial piping systems.\u003c\/p\u003e\n\u003cp\u003eThis clevis hanger is suited for commercial, industrial, pharmaceutical, petrochemical, and hospital piping applications. It is intended for use with non-insulated, stationary pipe lines where overhead rod support is required. The rod-mount design accepts a 0.75-inch diameter hanger rod. With a centerline distance of 7 inches and a rod take-out dimension of 5.875 inches, it is sized specifically for 6-inch pipe. It meets a broad set of standards including ASME B31.1, ANSI\/MSS SP-58\/SP-69 Type 1, AA-1192A Type 1, BSPSS-BS3974, WW-H-171E Type 1, UL, and FM, making it acceptable across a wide range of regulated piping systems in demanding environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eElectro-galvanized carbon steel construction resists corrosion in industrial and commercial environments\u003c\/li\u003e\n  \u003cli\u003e1,940-pound load rating supports heavy pipe runs in demanding applications\u003c\/li\u003e\n  \u003cli\u003eTemperature rating of 450 degrees F suitable for high-temperature piping systems\u003c\/li\u003e\n  \u003cli\u003eApproximately 1 inch to 1.5 inches of vertical adjustment available after pipe installation\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B31.1, ANSI\/MSS SP-58\/SP-69 Type 1, UL, FM, and additional standards\u003c\/li\u003e\n  \u003cli\u003eTop nut locks assembly against vibration-induced loosening when tightened securely\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 6-inch non-insulated, stationary pipe lines requiring overhead rod-mount support in commercial, industrial, pharmaceutical, petrochemical, and hospital piping systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed pipefitters or plumbing contractors in accordance with ASME B31.1 and applicable local mechanical codes. Shut down and depressurize the pipe system before positioning or adjusting the hanger. The lower nut and top nut are not included and must be installed and tightened securely to ensure proper hanger performance and vibration resistance. Verify that the hanger rod diameter matches the 0.75-inch mounting requirement before installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Rating\u003c\/strong\u003e: 1,940 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 450 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Size\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHanger Mounting Rod Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Distance\u003c\/strong\u003e: 7 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRod Take-Out Dimension\u003c\/strong\u003e: 5.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Electro Galvanized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Clevis, Rod Mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable Standards\u003c\/strong\u003e: ASME B31.1, AA-1192A Type 1, ANSI\/MSS SP-58\/SP-69 Type 1, BSPSS-BS3974, UL, WW-H-171E Type 1, FM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Commercial, Industrial, Pharmaceutical, Petrochemical, Hospital\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 1 Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CARPENTER PATERSON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 0.0001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CARPENTER \u0026 PATERSON","offers":[{"title":"Default Title","offer_id":51467668357426,"sku":"0.0001","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946511.jpg?v=1783909875","url":"https:\/\/voomisupply.com\/products\/carpenter-paterson-0-0001-clevis-hanger-6-inch-pipe","provider":"Voomi Supply","version":"1.0","type":"link"}