{"product_id":"carmex-km60i-kit-indexable-threading-toolholder-rh-5-8","title":"Carmex KM60I-KIT Indexable Threading Toolholder Rh 5\/8","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CARMEX KM60I-KIT is a right-hand indexable threading toolholder designed for precision internal threading operations on lathes and turning centers. Built around the KM toolholder style, it accepts 08 IR A60 inserts secured by a screw-clamping method, providing repeatable positioning and rigid insert support. The shank measures 5\/8 inch in both width and height, with an overall length of 5 inches. Minimum bore diameter is 0.31 inches, making it suitable for threading smaller internal diameters. Ten inserts are included in the kit, giving technicians immediate cutting capacity out of the box. Machinists and toolroom technicians install and operate this holder on CNC and manual turning equipment.\u003c\/p\u003e\u003cp\u003eThis toolholder is intended for internal threading applications in production and job-shop environments. The right-hand orientation suits standard bore-entry threading on conventional lathes and CNC turning centers. With a neck diameter of 0.265 inches and a back-of-bar to cutting edge measurement of 0.307 inches, the tool is sized for threading bores beginning at 0.31 inches. The maximum depth of cut reaches 0.70 inches, covering a range of thread depths in typical threading cycles. The center-to-cutting-edge dimension is 0.21 inches, which aids in accurate setup and offset entry at the machine control.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRight-hand KM-style toolholder for internal threading operations\u003c\/li\u003e\n\u003cli\u003eAccepts 08 IR A60 inserts with screw-clamping retention for secure, repeatable indexing\u003c\/li\u003e\n\u003cli\u003e5\/8 inch square shank (width and height) with 5 inch overall length\u003c\/li\u003e\n\u003cli\u003eMinimum bore diameter of 0.31 inches with maximum depth of cut of 0.70 inches\u003c\/li\u003e\n\u003cli\u003eNeck diameter of 0.265 inches supports access in tight bore entry conditions\u003c\/li\u003e\n\u003cli\u003eKit includes 10 inserts, ready for immediate use at installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with 08 IR A60 indexable threading inserts with a 3\/16 inch inscribed circle. Verify insert geometry and thread form match the application requirements before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis toolholder is installed by machinists and toolroom technicians on CNC or manual turning equipment. Power down and lock out the machine spindle before mounting or removing the toolholder or indexing inserts. Confirm shank bore fit and centerline height alignment before beginning threading cycles. Follow the machine tool manufacturer guidelines and applicable shop safety procedures when setting tool offsets and running first-pass cuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: KM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: 08 IR A60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bore Diameter\u003c\/strong\u003e: 0.31 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.70 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 0.307 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter to Cutting Edge\u003c\/strong\u003e: 0.21 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 3\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.265 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inserts Included\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Threading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CARMEX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: KM60I-KIT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CARMEX","offers":[{"title":"Default Title","offer_id":67905988788530,"sku":"KM60I-KIT","price":444.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0717ef8ea2e1d958e86b1aab472af76b.jpg?v=1791161658","url":"https:\/\/voomisupply.com\/products\/carmex-km60i-kit-indexable-threading-toolholder-rh-5-8","provider":"Voomi Supply","version":"1.0","type":"link"}