{"product_id":"carmex-11ira60bma-threading-insert-solid-carbide-60-degree","title":"Carmex 11IRA60BMA Threading Insert Solid Carbide 60 Degree","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CARMEX 11IRA60BMA is a solid carbide laydown threading insert designed for internal partial-profile threading operations. It cuts a 60-degree included angle thread and covers a range of 48 to 16 TPI, making it suitable for a wide variety of thread sizes in a single insert. The BMA grade uses a submicron carbide substrate with a PVD-applied TiAlN coating, delivering strong wear resistance and edge stability across a broad range of workpiece materials. Right-hand cutting geometry suits standard internal thread applications on lathes and turning centers. Machinists, toolroom operators, and CNC turning specialists will encounter this insert in production and job-shop environments alike.\u003c\/p\u003e\u003cp\u003eThe 11IRA60BMA is intended for right-hand internal threading on CNC lathes and manual turning equipment. The partial-profile design allows the insert to produce a range of thread pitches from 0.50 mm to 1.50 mm (48 to 16 TPI) without requiring a dedicated insert for each pitch. Its universal material grade designation covers steel, stainless steel, cast iron, aluminum, non-ferrous alloys, and high-temperature alloys, reducing tooling inventory requirements in mixed-material shops. The TiAlN coating supports dry or minimal-lubrication cutting where conditions allow.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide submicron substrate (BMA grade) for high edge integrity and extended tool life\u003c\/li\u003e\n\u003cli\u003ePVD TiAlN coating provides heat and wear resistance across universal workpiece material groups\u003c\/li\u003e\n\u003cli\u003e60-degree included angle partial profile covers 48 to 16 TPI (0.50 to 1.50 mm pitch) in one insert\u003c\/li\u003e\n\u003cli\u003eRight-hand internal threading geometry for standard bore threading on lathes and turning centers\u003c\/li\u003e\n\u003cli\u003e1\/4-inch inscribed circle (0.2500 inches) with 0.1270-inch thickness for 11-size insert holders\u003c\/li\u003e\n\u003cli\u003eManufactured to CE, ISO 13485:2016, ISO 14001:2015, and ISO 45001 standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in 11IR-style laydown threading insert holders that accept a 1\/4-inch inscribed circle, 0.1270-inch thick insert. Verify holder clamping system and seat geometry before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians. Power down and lock out the machine spindle before seating or removing any insert. Use the correct torque wrench and clamp screw specified by the holder manufacturer  -  do not over-torque the clamp screw, as this can crack carbide inserts. Inspect the insert pocket and seating surface for chips or debris before mounting the insert, and confirm thread direction and cutting parameters against the holder manufacturer's recommendations before starting the cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: 11IR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: BMA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN (Coated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreads Per Inch\u003c\/strong\u003e: 48-16 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Range\u003c\/strong\u003e: 0.50 to 1.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.1270 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0020 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal (H, K, M, N, P, S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.064 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: CE, ISO 13485:2016, ISO 14001:2015, ISO 45001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CARMEX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11IRA60BMA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CARMEX","offers":[{"title":"Default Title","offer_id":52100538695986,"sku":"11IRA60BMA","price":290.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9a61042b4ea340aece2d4df2511b14f8.jpg?v=1790069064","url":"https:\/\/voomisupply.com\/products\/carmex-11ira60bma-threading-insert-solid-carbide-60-degree","provider":"Voomi Supply","version":"1.0","type":"link"}