{"product_id":"cantex-a51baa1-ent-flexible-conduit-1-in-100-ft-pvc-600v","title":"Cantex A51BAA1 Ent Flexible Conduit 1 in 100 Ft Pvc 600V","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CANTEX A51BAA1 is a 1-inch trade size Electrical Nonmetallic Tubing (ENT) supplied in a 100-foot coil. Made from PVC and colored electric blue for code identification, this conduit carries a 600-volt maximum voltage rating and a temperature range of -20 to 50 degrees C. It meets NEMA TC-13 and NEC Article 362 requirements and carries both UL and CSA approvals. The corrugated construction allows hand bending without a conduit bender or special tooling. Licensed electricians install ENT in concealed, above-grade applications in new residential and light commercial construction.\u003c\/p\u003e\n\u003cp\u003eENT conduit is used in residential framing, commercial wood-frame construction, and other concealed interior locations permitted under NEC 362. The 1.059-inch inner diameter and smooth-profile corrugations reduce wire-pull drag, making it practical for pulling multiple conductors in a single run. The 100-foot coil format reduces cut waste on typical room-to-panel runs. This product is rated for use with 90-degree C conductors, making it compatible with common THHN and THWN-2 building wire used in residential and light commercial wiring.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrugated PVC design bends by hand, eliminating the need for bending equipment\u003c\/li\u003e\n  \u003cli\u003eRated for 90-degree C conductors, compatible with THHN and THWN-2 wire\u003c\/li\u003e\n  \u003cli\u003e600-volt maximum voltage rating meets NEC 362 and NEMA TC-13 standards\u003c\/li\u003e\n  \u003cli\u003eUL and CSA listed for code-compliant installations\u003c\/li\u003e\n  \u003cli\u003eNon-conductive and corrosion-resistant PVC construction\u003c\/li\u003e\n  \u003cli\u003eReduced inner surface profile cuts wire-pull drag on long runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style ENT conduit replacement or new-installation conduit for concealed interior applications in residential and light commercial construction where NEC Article 362 permits ENT use.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eENT conduit is installed by licensed electricians and must be used only in locations permitted under NEC Article 362, including concealed work in walls, floors, and ceilings of buildings no taller than the height limits specified by the NEC. De-energize all circuits in the work area before pulling conductors or making connections at boxes. Use listed ENT fittings and couplings rated for the same trade size; do not substitute EMT or rigid fittings. ENT is not approved for direct burial, exposed outdoor locations, or areas subject to physical damage unless specifically listed for such use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrade Size\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Diameter\u003c\/strong\u003e: 1.059 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Diameter\u003c\/strong\u003e: 1.325 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 100 feet per coil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Voltage Rating\u003c\/strong\u003e: 600 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: -20 to 50 degrees C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: PVC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Electric Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.178 pounds per foot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 17 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable Standards\u003c\/strong\u003e: NEMA TC-13, NEC 362\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprovals\u003c\/strong\u003e: UL, CSA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CANTEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: A51BAA1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CANTEX","offers":[{"title":"Default Title","offer_id":51284000014642,"sku":"A51BAA1","price":186.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279389.jpg?v=1781065597","url":"https:\/\/voomisupply.com\/products\/cantex-a51baa1-ent-flexible-conduit-1-in-100-ft-pvc-600v","provider":"Voomi Supply","version":"1.0","type":"link"}