{"product_id":"campbell-5412435-anchor-shackle-34000-lb-screw-pin-galvanized","title":"Campbell 5412435 Anchor Shackle 34000 Lb Screw Pin Galvanized","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CAMPBELL 5412435 is a heavy-duty anchor shackle with a screw pin design, rated to a 34,000 lb working load limit. Constructed from carbon steel with a galvanized finish, this shackle is built for demanding rigging, lifting, and load-securing applications. The anchor-style bow provides a wider bearing surface compared to chain shackles, making it suited for multi-leg sling connections and load attachment points where side loading or angular pull is a factor. At 16 pounds, it is a substantial piece of hardware intended for industrial and commercial rigging work performed by qualified riggers and lift planners.\u003c\/p\u003e\u003cp\u003eThis anchor shackle is used in construction, marine, industrial, and utility rigging where high working load limits and corrosion resistance are required. The galvanized carbon steel construction provides protection against rust in outdoor and marine environments. The screw pin configuration allows for secure, removable attachment during non-permanent rigging setups. It is appropriate for use with wire rope slings, chain slings, hooks, and structural attachment points in both overhead lifting and horizontal pulling applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e34,000 lb working load limit for heavy industrial rigging applications\u003c\/li\u003e\n\u003cli\u003eAnchor shackle bow geometry supports multi-leg and angled sling connections\u003c\/li\u003e\n\u003cli\u003eScrew pin closure for secure, field-removable attachment\u003c\/li\u003e\n\u003cli\u003eCarbon steel construction with galvanized finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMeets ASTM A-153 galvanizing standard\u003c\/li\u003e\n\u003cli\u003eJaw inside height of 5.75 inches accommodates large fitting and sling hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use anchor shackle for heavy rigging, lifting, and load-securing applications requiring a screw pin anchor shackle at a 34,000 lb working load limit.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by qualified riggers familiar with applicable ASME B30 rigging standards and local safety regulations. Verify the working load limit of all connected hardware in the rigging system meets or exceeds the intended load before use. Always thread the screw pin fully and secure it to prevent accidental backing out under load. Never exceed the rated working load limit, and inspect the shackle for deformation, cracks, or corrosion before each use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShackle Type\u003c\/strong\u003e: Anchor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Type\u003c\/strong\u003e: Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Load Limit\u003c\/strong\u003e: 34,000 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJaw Inside Height\u003c\/strong\u003e: 5.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead\/Holder Diameter\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Thickness\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 10 inches (L) x 8 inches (W) x 3.5 inches (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASTM A-153\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 46151600\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CAMPBELL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5412435\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CAMPBELL","offers":[{"title":"Default Title","offer_id":51542916858162,"sku":"5412435","price":371.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b7c50035edc38662411f3c026eaed67c.jpg?v=1785910873","url":"https:\/\/voomisupply.com\/products\/campbell-5412435-anchor-shackle-34000-lb-screw-pin-galvanized","provider":"Voomi Supply","version":"1.0","type":"link"}