{"product_id":"cambridge-lee-industries-dl04060825bx-mini-split-line-set-25-ft","title":"Cambridge-lee Industries DL04060825BX Mini-split Line Set 25 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CAMBRIDGE-LEE INDUSTRIES DL04060825BX is a pre-insulated copper mini-split line set designed for residential and light-commercial ductless HVAC installations. The set includes a 1\/4-inch liquid line and a 3\/8-inch suction line, both wrapped in a 1\/2-inch thick black polyethylene hard-shell insulation jacket. At 25 feet in length, it covers the typical wall-penetration run from an indoor air handler to an outdoor condenser unit. Both ends are plain (unflared), leaving the field technician to flare or braze connections on-site per the equipment manufacturer's requirements. Licensed HVAC technicians are the primary installers of this component.\u003c\/p\u003e\n\u003cp\u003eThis line set is suited for single-zone and multi-zone ductless mini-split systems in residential new construction, retrofit, and replacement applications. The 25-foot length accommodates most standard exterior wall and short-run rooftop installations. The black polyethylene hard-shell jacket resists UV exposure and physical damage in exposed runs. The plain-end configuration supports field flaring with standard HVAC flaring tools or silver-brazed connections, giving the installer flexibility to match the equipment manufacturer's specified connection method.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4-inch liquid line and 3\/8-inch suction line in a single pre-paired assembly\u003c\/li\u003e\n  \u003cli\u003e1\/2-inch thick black polyethylene hard-shell insulation jacket for UV and impact resistance\u003c\/li\u003e\n  \u003cli\u003e25-foot length suitable for standard residential mini-split runs\u003c\/li\u003e\n  \u003cli\u003ePlain end x plain end configuration supports field flaring or brazing\u003c\/li\u003e\n  \u003cli\u003eCopper construction meets ASTM E9600 material specification\u003c\/li\u003e\n  \u003cli\u003eListed to ASTM E84 and C1427 flame and smoke standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and new-installation line set for residential and light-commercial ductless mini-split systems requiring a 1\/4-inch liquid line and 3\/8-inch suction line configuration.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician familiar with refrigerant piping practices and applicable mechanical codes. Recover or isolate refrigerant from the system before disconnecting any existing line set, following EPA Section 608 requirements. Plain ends must be field-flared to the equipment manufacturer's specification using a calibrated flaring tool, or silver-brazed with nitrogen purge per standard industry practice. Avoid sharp bends that could kink the copper tubing or compress the insulation jacket during routing.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLiquid Line Diameter\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuction Line Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation Thickness\u003c\/strong\u003e: 1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 25 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Plain End x Plain End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation Material\u003c\/strong\u003e: Black Polyethylene Hard Shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConductor Material\u003c\/strong\u003e: Copper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: ASTM E9600\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable Standards\u003c\/strong\u003e: ASTM E84, C1427, UL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: HVAC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CAMBRIDGE-LEE INDUSTRIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: DL04060825BX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CAMBRIDGE-LEE INDUSTRIES","offers":[{"title":"Default Title","offer_id":51284068434226,"sku":"DL04060825BX","price":161.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309278590.png?v=1781067706","url":"https:\/\/voomisupply.com\/products\/cambridge-lee-industries-dl04060825bx-mini-split-line-set-25-ft","provider":"Voomi Supply","version":"1.0","type":"link"}