{"product_id":"bsc-preferred-se2c18x18-2-18x-two-compartment-sink-72in","title":"Bsc Preferred SE2C18X18-2-18X Two Compartment Sink 72in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BSC PREFERRED SE2C18X18-2-18X is an 18-gauge type 300 series stainless steel two-compartment sink built for demanding commercial and institutional environments. At 72 inches long, it features two 18 x 18 inch bowls with depths of 11 inches and 14 inches respectively, plus left and right 18-inch drainboards that extend the usable work surface on both sides. A 9-inch backsplash with tile ledge and a splash-mount faucet configuration requiring two holes round out the design. Licensed plumbers and commercial kitchen installers handle this fixture in code-governed settings where durability and sanitation compliance are the baseline expectation.\u003c\/p\u003e\u003cp\u003eThis sink is designed for high-volume warewashing, food prep, and general utility applications in commercial kitchens, healthcare facilities, classrooms, and similar institutional spaces. The dual-bowl layout accommodates sequential wash-rinse or wash-soak workflows, while the dual drainboards allow for drying or staging on either side of the sink. The variable bowl depths let operators assign lighter and heavier tasks to each compartment without reconfiguring the station.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e18-gauge type 300 series stainless steel construction for corrosion resistance and long service life\u003c\/li\u003e\n\u003cli\u003eTwo bowls, each 18 x 18 inches: bowl one at 11 inches deep, bowl two at 14 inches deep\u003c\/li\u003e\n\u003cli\u003eLeft and right 18-inch drainboards for staging and drying on both sides\u003c\/li\u003e\n\u003cli\u003e9-inch backsplash with tile ledge for straightforward wall-flush installation\u003c\/li\u003e\n\u003cli\u003e3\/4-inch coved corners throughout for easy sanitation and cleaning\u003c\/li\u003e\n\u003cli\u003eAdjustable bullet feet allow leveling on uneven floors\u003c\/li\u003e\n\u003cli\u003eSplash-mount faucet configuration with two pre-drilled holes (faucet not included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-install option for two-compartment commercial sink applications in kitchens, healthcare, and institutional facilities requiring NSF-style stainless steel construction.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of commercial sinks of this type is typically performed by a licensed plumber in accordance with local plumbing code and IPC requirements. Shut off the water supply and confirm drain rough-in locations match the bowl outlet positions before setting the fixture. Do not overtighten faucet mounting hardware against the stainless deck. Verify floor load capacity before placement, as the unit weighs 135 pounds unloaded.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGauge\u003c\/strong\u003e: 18 gauge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Type 300 series stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e: 72 x 23.81 x 43.75 inches (L x W x H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBowl One Dimensions\u003c\/strong\u003e: 18 x 18 x 11 inches (L x W x D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBowl Two Dimensions\u003c\/strong\u003e: 18 x 18 x 14 inches (L x W x D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrainboard Size\u003c\/strong\u003e: 18 inches left and right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacksplash Height\u003c\/strong\u003e: 9 inches with tile ledge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoved Corners\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaucet Holes\u003c\/strong\u003e: 2 (splash mount, faucet not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet\u003c\/strong\u003e: Adjustable bullet feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 135 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: EA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BSC PREFERRED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SE2C18X18-2-18X\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BSC PREFERRED","offers":[{"title":"Default Title","offer_id":51701051064626,"sku":"SE2C18X18-2-18X","price":1653.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6daeb8e693c6fd2eb679e6a035b56986.jpg?v=1788397463","url":"https:\/\/voomisupply.com\/products\/bsc-preferred-se2c18x18-2-18x-two-compartment-sink-72in","provider":"Voomi Supply","version":"1.0","type":"link"}