{"product_id":"bsc-preferred-lrad332240mr2-double-bowl-drop-in-sink","title":"Bsc Preferred LRAD332240MR2 Double Bowl Drop-in Sink","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BSC PREFERRED LRAD332240MR2 is a double bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 33 inches in length by 22 inches in width with a bowl depth of 4 inches. The two equal-sized rectangular bowls each measure 13.5 inches in length and 16 inches in width, providing dedicated zones for washing, soaking, rinsing, and drying. An offset drain design maximizes under-sink cabinet space, and both drains are positioned at the rear center of each bowl for improved usability. Sound-deadening pads are factory-applied to reduce vibration and noise during use. This sink is installed by licensed plumbers and general contractors working on residential kitchen remodels or new construction.\u003c\/p\u003e\n\u003cp\u003eThe LRAD332240MR2 is configured for MR2 faucet hole arrangements and requires a minimum base cabinet width of 36 inches for proper fit. The countertop cutout dimension is 32-3\/8 inches x 21-3\/8 inches with a corner radius of 1-1\/2 inches. The U-channel mounting system accepts mounting clips within the channel perimeter, securing the sink to the countertop deck without specialized tooling. The ADA-compliant bowl depth supports accessibility requirements in residential and light commercial kitchens. This sink is manufactured in the USA and carries a satin finish that allows minor surface scratches to blend naturally with the brushed pattern over time.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e18-gauge Type 304 stainless steel construction for corrosion resistance and long service life\u003c\/li\u003e\n  \u003cli\u003eTwo equal rectangular bowls, each 13.5 inches x 16 inches, with rear center drain placement\u003c\/li\u003e\n  \u003cli\u003eOffset drain configuration maximizes usable under-sink cabinet space\u003c\/li\u003e\n  \u003cli\u003eFactory-applied sound-deadening pads reduce vibration and ambient noise\u003c\/li\u003e\n  \u003cli\u003eU-channel mounting system with clip-in installation for straightforward drop-in fitting\u003c\/li\u003e\n  \u003cli\u003eADA-compliant bowl depth and MR2 faucet configuration pre-drilled at the factory\u003c\/li\u003e\n  \u003cli\u003eMade in the USA with a satin finish that resists visible light scratching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for drop-in installation in residential kitchen countertops with a minimum base cabinet width of 36 inches. Compatible with MR2 faucet configurations. Countertop cutout required: 32-3\/8 inches x 21-3\/8 inches with a 1-1\/2 inch corner radius.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a licensed plumber following applicable IPC requirements. Shut off the water supply and disconnect existing drain plumbing before removal of any existing sink. Apply a continuous bead of silicone sealant around the countertop cutout perimeter before setting the sink, then secure mounting clips evenly within the U-channel to achieve a uniform seal. Do not overtighten clips, as this can distort the sink flange or crack stone countertop materials.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e: 33 inches x 22 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBowl Depth\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndividual Bowl Size\u003c\/strong\u003e: 13.5 inches x 16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountertop Cutout\u003c\/strong\u003e: 32-3\/8 inches x 21-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Cabinet Width\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGauge\u003c\/strong\u003e: 18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Type 304 Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFaucet Configuration\u003c\/strong\u003e: MR2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Type\u003c\/strong\u003e: Drop-In with U-Channel Clips\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eADA Compliant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eItem Weight\u003c\/strong\u003e: 21.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 23 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 37.72 inches x 26.28 inches x 9.51 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BSC PREFERRED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: LRAD332240MR2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BSC PREFERRED","offers":[{"title":"Default Title","offer_id":51689888940338,"sku":"LRAD332240MR2","price":1202.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0c48db4873327ebf0592bd91caa07a4d_51f4966a-3c27-4f40-a4b4-605be232da5a.jpg?v=1788265207","url":"https:\/\/voomisupply.com\/products\/bsc-preferred-lrad332240mr2-double-bowl-drop-in-sink","provider":"Voomi Supply","version":"1.0","type":"link"}