{"product_id":"bsc-preferred-lrad3122502-drop-in-kitchen-sink-ada","title":"Bsc Preferred LRAD3122502 Drop-in Kitchen Sink Ada","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BSC PREFERRED LRAD3122502 is a single-bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel, measuring 31 inches x 22 inches with a 5-inch depth. The scratch-resistant Lustertone finish resists everyday wear and allows minor surface scratches to be buffed out over time. Sound Guard technology uses bottom-mounted pads to reduce vibration and noise during use. The offset drain is positioned at the rear center, which maximizes usable bowl space and frees up cabinet room below for storage and plumbing access. Licensed plumbers and remodeling contractors install this sink as part of residential kitchen projects.\u003c\/p\u003e\n\u003cp\u003eThis sink is designed for residential kitchen installations requiring ADA compliance when installed to applicable standards. It fits cabinets with a minimum opening of 36 inches and accommodates countertops up to 3\/4 inches thick. Two pre-drilled faucet holes allow flexibility in faucet and accessory configuration. The U-channel mounting system integrates clips directly into the channel, reducing time spent working under the counter during installation. It is manufactured in the USA and suited for both new construction and renovation projects.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability\u003c\/li\u003e\n  \u003cli\u003eSound Guard bottom-only pad system dampens noise and vibration during sink use\u003c\/li\u003e\n  \u003cli\u003eOffset rear-center drain placement maximizes bowl volume and cabinet storage below\u003c\/li\u003e\n  \u003cli\u003eScratch-resistant Lustertone finish that can be restored if deeper surface scratches occur\u003c\/li\u003e\n  \u003cli\u003eTwo faucet holes for flexible fixture and accessory pairing\u003c\/li\u003e\n  \u003cli\u003eU-channel integrated mounting clip system for faster drop-in installation\u003c\/li\u003e\n  \u003cli\u003eADA compliant when installed per applicable accessibility guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a drop-in replacement or new-install sink for residential kitchens. Requires a minimum cabinet size of 36 inches and is compatible with countertops up to 3\/4 inches thick. Accepts standard drain and faucet hardware for two-hole configurations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with local plumbing codes. Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. The U-channel mounting system accepts integrated clips — verify clip engagement around the full perimeter before completing the countertop cutout seal. ADA compliance depends on finished installation height and knee clearance; consult applicable accessibility standards before finalizing rough-in dimensions.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: 18-gauge Type 304 stainless steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBowl Configuration\u003c\/strong\u003e: Single bowl\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e: 31 inches x 22 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBowl Depth\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrain Location\u003c\/strong\u003e: Offset rear center\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFaucet Holes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Cabinet Size\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Countertop Thickness\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Type\u003c\/strong\u003e: Drop-in with U-channel integrated clip system\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eADA Compliant\u003c\/strong\u003e: Yes, when properly installed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 19 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BSC PREFERRED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: LRAD3122502\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BSC PREFERRED","offers":[{"title":"Default Title","offer_id":51724028084530,"sku":"LRAD3122502","price":1077.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/32554af437f8fd9c5f56518f9860b205_85a513d4-630b-4d27-9fcd-c38c0004b776.jpg?v=1788611838","url":"https:\/\/voomisupply.com\/products\/bsc-preferred-lrad3122502-drop-in-kitchen-sink-ada","provider":"Voomi Supply","version":"1.0","type":"link"}