{"product_id":"bsc-preferred-lrad252255mr2-drop-in-kitchen-sink-25x22","title":"Bsc Preferred LRAD252255MR2 Drop-in Kitchen Sink 25x22","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BSC PREFERRED LRAD252255MR2 is a single-bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel. The outer dimensions measure 25 inches by 22 inches, with an interior bowl that runs 21 inches in length and 15.75 inches in width at a depth of 5.125 inches. That bowl volume handles full sheet pans, stock pots, and commercial prep loads without issue. A rear center drain placement improves gravity drainage and keeps the cabinet space beneath clear for storage. U-channel sink mounting accepts clips before the sink is set into the countertop cutout, which speeds up installation without requiring a helper underneath. Sound-deadening pads are factory-applied to the underside to reduce vibration noise during use. The sink carries ADA compliance designation when installed per applicable guidelines.\u003c\/p\u003e\n\u003cp\u003eThis sink is suited for residential kitchens, light commercial prep areas, and accessible kitchen installations where ADA conformance is required. The drop-in configuration fits standard countertop materials including laminate, solid surface, and tile. A minimum cabinet width of 30 inches is required for proper fitment. The 3.5-inch drain opening accepts standard basket strainer assemblies available from most plumbing supply houses. The sink is manufactured in the USA and is appropriate for both new construction and kitchen renovation projects. Licensed plumbers and finish carpenters typically handle final installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e18-gauge Type 304 stainless steel construction resists corrosion and surface wear\u003c\/li\u003e\n  \u003cli\u003eRear center drain maximizes under-sink cabinet storage and improves drainage flow\u003c\/li\u003e\n  \u003cli\u003eU-channel mounting system allows clips to be pre-loaded before drop-in placement\u003c\/li\u003e\n  \u003cli\u003eFactory-applied sound-deadening pads reduce impact and water noise\u003c\/li\u003e\n  \u003cli\u003eADA compliant when installed per applicable accessibility guidelines\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for drop-in installation into standard kitchen countertops. Requires a minimum cabinet width of 30 inches. The 3.5-inch drain opening is compatible with standard kitchen basket strainer assemblies.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed plumber in accordance with local IPC requirements. Shut off the water supply and disconnect existing drain lines before removing any existing sink. Apply a continuous bead of silicone sealant around the underside of the sink rim before setting it into the countertop cutout, then tighten mounting clips evenly to avoid distorting the rim. Do not overtighten clips against fragile countertop materials such as tile or thin laminate.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e: 25 x 22 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBowl Length\u003c\/strong\u003e: 21 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBowl Width\u003c\/strong\u003e: 15.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBowl Depth\u003c\/strong\u003e: 5.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGauge\u003c\/strong\u003e: 18-gauge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Type 304 stainless steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Single bowl\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Type\u003c\/strong\u003e: Drop-in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrain Opening\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrain Location\u003c\/strong\u003e: Rear center\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Cabinet Size\u003c\/strong\u003e: 30 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eADA Compliant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 15 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 30.66 x 26.28 x 9.51 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BSC PREFERRED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: LRAD252255MR2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BSC PREFERRED","offers":[{"title":"Default Title","offer_id":51691489034546,"sku":"LRAD252255MR2","price":803.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4b75ec1a10035f5682c268677be4b149_62790b42-5011-474f-bc4b-9da70dc3f9ff.jpg?v=1788285801","url":"https:\/\/voomisupply.com\/products\/bsc-preferred-lrad252255mr2-drop-in-kitchen-sink-25x22","provider":"Voomi Supply","version":"1.0","type":"link"}