{"product_id":"bsc-preferred-146729-acrylic-latex-caulk-10-1-oz-white","title":"Bsc Preferred 146729 Acrylic Latex Caulk 10.1 Oz White","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BSC PREFERRED 146729 is a one-part acrylic latex caulk formulated for sealing building and construction joints in both interior and exterior applications. Packaged in a 10.1 fluid ounce cartridge, it delivers a permanent white finish that accepts paint without priming on porous surfaces. The formula is UV resistant and non-yellowing, making it suitable for exposed trim, window frames, and door surrounds where long-term appearance matters. Licensed contractors, carpenters, and general tradespeople use this caulk where moderate joint movement is expected. Joint sizing follows a standard 2:1 width-to-depth ratio for optimal performance.\u003c\/p\u003e\u003cp\u003eThis caulk is suited for residential and commercial construction joints including baseboards, trim, window frames, and door perimeters. It adheres to all common building surfaces provided they are clean, dry, and free of dust and grease. No primer is required on porous surfaces. On smooth or non-porous surfaces such as PVC or glass, use of a surface activator is recommended to improve adhesion. A preliminary compatibility test is advised on PVD-coated and other non-porous materials before full application.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne-part acrylic latex formula  -  no mixing required\u003c\/li\u003e\n\u003cli\u003ePaintable surface with permanent white color and non-yellowing finish\u003c\/li\u003e\n\u003cli\u003eUV resistant for interior and exterior exposure\u003c\/li\u003e\n\u003cli\u003eNo primer required on porous surfaces\u003c\/li\u003e\n\u003cli\u003eVery good adhesion across common building materials\u003c\/li\u003e\n\u003cli\u003eRated for moderate joint movement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on all standard building surfaces including masonry, wood, drywall, and similar porous substrates. For smooth, non-porous, or PVD-coated materials, a surface activator and compatibility test are recommended prior to installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003ePower or gas shutoff is not required for caulk application, but all surfaces must be clean, dry, and free of grease before applying. Cut the cartridge tip and load into a standard caulk gun sized for 10.1 fluid ounce cartridges. Minimum joint width is 0.25 inches and maximum joint width is approximately 1.19 inches, with joint depth following a 2:1 width-to-depth guideline. Allow adequate cure time before painting or exposing the joint to moisture.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: One-part acrylic latex caulk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Size\u003c\/strong\u003e: 10.1 fluid ounces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Interior and exterior\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Joint Width\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Joint Width\u003c\/strong\u003e: 1.19 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Joint Depth\u003c\/strong\u003e: 0.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoint Sizing Recommendation\u003c\/strong\u003e: Width equals 2 times depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimer Required\u003c\/strong\u003e: No, on porous surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Material\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BSC PREFERRED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 146729\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BSC PREFERRED","offers":[{"title":"Default Title","offer_id":51782985384242,"sku":"146729","price":38.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2613c10b4aa0fdff3f49573166cd50f9.jpg?v=1789183748","url":"https:\/\/voomisupply.com\/products\/bsc-preferred-146729-acrylic-latex-caulk-10-1-oz-white","provider":"Voomi Supply","version":"1.0","type":"link"}