{"product_id":"browning-730007-pbe920x2-pillow-block-2in-id-cast-iron","title":"Browning 730007 PBE920X2 Pillow Block 2in Id Cast Iron","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BROWNING 730007 is a Type E nonexpansion pillow block bearing unit in the PBE920 series, built for heavy-duty shaft support in industrial and mechanical drive applications. The housing is cast iron with a 52100 bearing steel tapered roller insert. It accepts a 2-inch bore straight shaft secured by a set screw lock. The unit measures 8.875 inches overall length with a 4.5-inch height and a base-to-center distance of 2.25 inches. Rated to 2000 RPM, it is sized for demanding power transmission loads where a rigid, nonexpansion mounting point is required. Licensed HVAC, mechanical, and industrial maintenance technicians regularly specify this type of unit for fan shafts, conveyor drives, and blower assemblies.\u003c\/p\u003e\n\u003cp\u003eThis pillow block is suited for industrial machinery, commercial HVAC fan decks, conveyor systems, and similar rotating equipment where a two-bolt, nonexpansion mount is appropriate. The PBE920X2 designation identifies the series and 2-inch bore size. Mounting bolt holes are centered 7.25 inches apart, with a minimum distance between mounting holes of 6.1875 inches. The tapered roller insert provides strong radial and thrust load capacity compared to a standard ball insert, making it a common choice in higher-load, moderate-speed applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType E nonexpansion pillow block design — provides a fixed shaft position at the mounting point\u003c\/li\u003e\n  \u003cli\u003eTapered roller bearing insert for combined radial and axial load handling\u003c\/li\u003e\n  \u003cli\u003e52100 bearing steel insert housed in a cast iron body for durability\u003c\/li\u003e\n  \u003cli\u003eSet screw shaft lock on a straight 2-inch bore — no adapter sleeve required\u003c\/li\u003e\n  \u003cli\u003eTwo-bolt mounting with 7.25-inch bolt hole center-to-center spacing\u003c\/li\u003e\n  \u003cli\u003e2000 RPM maximum rated speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct installation unit for machinery requiring a two-bolt, Type E nonexpansion pillow block with a 2-inch straight bore in the PBE920 series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by industrial maintenance technicians or mechanical contractors. Shut down and lock out the drive system before removing or installing any bearing unit. Ensure the mounting surface is flat and clean before seating the housing to prevent misalignment stress on the insert. Set screws should be tightened against a clean, undamaged shaft surface; do not install on a shaft that is corroded, undersize, or out of round.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: PBE920\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Insert Type\u003c\/strong\u003e: Tapered Roller\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 8.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase-to-Center Distance\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt Hole Center-to-Center\u003c\/strong\u003e: 7.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Distance Between Mounting Holes\u003c\/strong\u003e: 6.1875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Bolts\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Type\u003c\/strong\u003e: Set Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 2000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing Material\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: 52100 Bearing Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 11 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31171500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BROWNING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 730007\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BROWNING","offers":[{"title":"Default Title","offer_id":51542761046322,"sku":"730007","price":621.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c21f64b528e0a189081a1dad8f30bdcd.jpg?v=1785906574","url":"https:\/\/voomisupply.com\/products\/browning-730007-pbe920x2-pillow-block-2in-id-cast-iron","provider":"Voomi Supply","version":"1.0","type":"link"}