{"product_id":"browning-1069178-type-g-split-taper-bushing-1-in-bore","title":"Browning 1069178 Type G Split Taper Bushing 1 in Bore","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BROWNING 1069178 is a Type G split taper sprocket bushing designed for secure shaft-to-sprocket and shaft-to-sheave connections in power transmission applications. Machined from iron, this bushing features a 1 inch bore with a 1\/4 inch keyway width and 1\/8 inch keyway depth, allowing positive rotational locking on keyed shafts. The outside diameter measures 2 inches, with a hub fit range of 1.133 to 1.172 inches OD. Rated to a maximum torque of 95 inch-pounds, it suits light-duty industrial and mechanical drive systems. Licensed HVAC and mechanical technicians, as well as industrial maintenance professionals, install these bushings during drive system assembly or component replacement.\u003c\/p\u003e\n\u003cp\u003eThis bushing is intended for use with split taper sprockets and sheaves across a range of industrial and commercial drive configurations. The split taper design allows the bushing to draw evenly into the sprocket or sheave hub as fasteners are tightened, creating a tight, concentric fit without requiring a press. Typical applications include conveyor drives, fan shaft assemblies, and belt or chain drive systems where shaft sizes fall within the 1 inch bore specification.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType G split taper bushing series for use with compatible split taper sprockets and sheaves\u003c\/li\u003e\n  \u003cli\u003e1 inch bore diameter with 1\/4 inch keyway width and 1\/8 inch keyway depth for keyed shaft engagement\u003c\/li\u003e\n  \u003cli\u003e2 inch outside diameter with a hub fit OD range of 1.133 to 1.172 inches\u003c\/li\u003e\n  \u003cli\u003eMaximum torque rating of 95 inch-pounds\u003c\/li\u003e\n  \u003cli\u003eIron construction for durability in industrial drive environments\u003c\/li\u003e\n  \u003cli\u003eThread size 1\/4 x 5\/8 for standard bushing fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with split taper sprockets and sheaves accepting a Type G bushing series. Consult the sprocket or sheave manufacturer specifications to confirm Type G bushing compatibility before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified mechanical or industrial maintenance technicians. De-energize and lock out the drive system fully before beginning any shaft or bushing work, following OSHA lockout\/tagout procedures. Clean the bushing bore, shaft, and hub bore before assembly to ensure proper seating. Do not use impact tools to drive the bushing into the hub; tighten fasteners gradually and evenly in a cross pattern to draw the bushing squarely into the taper.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Split Taper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Series\u003c\/strong\u003e: G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHub Fit OD Range\u003c\/strong\u003e: 1.133 to 1.172 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKeyway Width\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKeyway Depth\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/4 x 5\/8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Torque\u003c\/strong\u003e: 95 inch-pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31171600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BROWNING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1069178\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BROWNING","offers":[{"title":"Default Title","offer_id":51540719665458,"sku":"1069178","price":34.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1f0af98b4205fb967034176899ee5ab3.jpg?v=1785862850","url":"https:\/\/voomisupply.com\/products\/browning-1069178-type-g-split-taper-bushing-1-in-bore","provider":"Voomi Supply","version":"1.0","type":"link"}