{"product_id":"bridgeport-fittings-lb-61cg-type-lb-conduit-body-1-2-inch","title":"Bridgeport Fittings LB-61CG Type Lb Conduit Body 1\/2 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BRIDGEPORT FITTINGS LB-61CG is a 1\/2-inch malleable iron Type LB rigid conduit body supplied with a zinc-coated steel cover and neoprene gasket. It is designed for 90-degree cable pulls, with conductors exiting through the back of the body opposite the cover. The NPT-threaded hubs accept rigid metallic conduit (RMC) and intermediate metal conduit (IMC) screwed directly into place. With a 4.5 cubic inch interior volume, zinc electro-plate finish, and malleable iron construction, this conduit body delivers strong corrosion and impact-abrasion resistance suited to demanding industrial environments. Licensed electricians and electrical contractors install this fitting during raceway rough-in and conductor-pulling operations.\u003c\/p\u003e\n\u003cp\u003eThe LB-61CG is intended for use in wet locations and heavy-duty industrial applications where reliable conduit access points are required. It provides access to the interior of the conduit system for conductor pulling, splicing, inspection, and routine maintenance. The preassembled neoprene gasket seals the cover interface against dust, water, and most liquids and oils. Trade size 1\/2-inch conduit bodies in this series are available through 4 inches, making this fitting part of a consistent product family for full-system builds.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType LB configuration routes conductors at 90 degrees, with the exit port located on the back of the body opposite the cover\u003c\/li\u003e\n  \u003cli\u003eMalleable iron body with zinc electro-plate finish resists corrosion and impact abrasion in heavy-duty industrial settings\u003c\/li\u003e\n  \u003cli\u003eNPT tapered hubs accept rigid metallic conduit and intermediate metal conduit screwed directly into the body\u003c\/li\u003e\n  \u003cli\u003ePreassembled zinc-coated steel cover and neoprene gasket protect inner conductors from dust, water, and oils\u003c\/li\u003e\n  \u003cli\u003e4.5 cubic inch interior volume supports conductor pulling and splicing per NEC fill requirements\u003c\/li\u003e\n  \u003cli\u003eUL Listed under File No. E11077; rated NEMA Type 2, 3, 3R, and 4 for wet and outdoor locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eListed for use with rigid metallic raceways including rigid metal conduit and intermediate metal conduit. Suitable for wet locations. NEMA 4 rated. Compatible with 1\/2-inch trade size conduit systems. Part of the BRIDGEPORT FITTINGS LB-61CG series available in trade sizes 1\/2 inch through 4 inches.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits in the conduit run before opening the body or pulling conductors. Thread rigid or intermediate metal conduit into the NPT hubs by hand first, then tighten with appropriate conduit wrenches to ensure a secure, watertight connection. Do not overtighten the cover hardware, as this can damage the neoprene gasket and compromise the NEMA 4 wet-location seal.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrade Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Malleable Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCover Material\u003c\/strong\u003e: Zinc Coated Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGasket Material\u003c\/strong\u003e: Neoprene\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Zinc Electro-Plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterior Volume\u003c\/strong\u003e: 4.5 cubic inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHub Thread Type\u003c\/strong\u003e: NPT Tapered\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNEMA Rating\u003c\/strong\u003e: Type 2, 3, 3R, 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUL File Number\u003c\/strong\u003e: E11077\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 4.62 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.44 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth\u003c\/strong\u003e: 1.44 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 1 Year\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: China\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BRIDGEPORT FITTINGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: LB-61CG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BRIDGEPORT FITTINGS","offers":[{"title":"Default Title","offer_id":51346124374322,"sku":"LB-61CG","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552965.png?v=1782071436","url":"https:\/\/voomisupply.com\/products\/bridgeport-fittings-lb-61cg-type-lb-conduit-body-1-2-inch","provider":"Voomi Supply","version":"1.0","type":"link"}