{"product_id":"bosch-hc2054-sds-plus-rotary-hammer-drill-bit-5-16-in","title":"Bosch HC2054 Sds-plus Rotary Hammer Drill Bit 5\/16 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BOSCH HC2054 is a carbide-tipped rotary hammer drill bit designed for high-impact drilling into concrete and masonry. Fitted with an SDS-Plus shank, it locks into SDS-Plus rotary hammers without additional tooling and delivers consistent impact transfer throughout the drilling cycle. The 4-flute geometry provides efficient debris removal while the carbide tip maintains cutting edge durability under repeated use. With a 10-inch usable flute length and 12-inch overall length, this bit handles anchoring applications and through-hole drilling in standard and thick masonry assemblies. It meets ANSI standards and is sold as a single piece.\u003c\/p\u003e\n\u003cp\u003eThis bit is intended for use in concrete, block, brick, and general masonry substrates. Typical applications include anchor bolt holes, conduit penetrations, and through-hole drilling in structural concrete. It is well suited for commercial and residential construction sites where an SDS-Plus rotary hammer is the primary drilling tool. Electricians, plumbers, HVAC installers, and concrete contractors regularly use bits of this type when setting anchors or running penetrations through concrete walls and slabs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbide-tipped cutting head resists wear on concrete and masonry surfaces\u003c\/li\u003e\n  \u003cli\u003eSDS-Plus shank provides secure tool-free chuck engagement and positive impact transfer\u003c\/li\u003e\n  \u003cli\u003e4-flute design accelerates dust and debris evacuation during drilling\u003c\/li\u003e\n  \u003cli\u003e10-inch usable flute length supports deep anchor and through-hole applications\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bit geometry and performance\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel body supports the carbide tip under rotary hammer impact loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SDS-Plus rotary hammers. Compatible with any tool that accepts the standard SDS-Plus shank interface.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by the qualified trade professional operating the rotary hammer on site. Confirm the hammer tool is set to rotary hammer mode and the bit is fully seated and locked in the SDS-Plus chuck before drilling. Wear appropriate PPE including eye protection and dust control measures when drilling concrete or masonry. Follow applicable OSHA silica dust standards when dry drilling in confined or enclosed spaces.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16 inches (0.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: SDS-Plus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.310 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: Carbide Tipped \/ High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Concrete, Masonry\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Anchoring, Through Hole Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 16.249 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 piece per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BOSCH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HC2054\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BOSCH","offers":[{"title":"Default Title","offer_id":51541419688242,"sku":"HC2054","price":28.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3f62d7093ec9d1c567983cdb475da636.jpg?v=1785875594","url":"https:\/\/voomisupply.com\/products\/bosch-hc2054-sds-plus-rotary-hammer-drill-bit-5-16-in","provider":"Voomi Supply","version":"1.0","type":"link"}