{"product_id":"bosch-hc2010-sds-plus-rotary-hammer-drill-bit-3-16-in","title":"Bosch HC2010 Sds-plus Rotary Hammer Drill Bit 3\/16 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BOSCH HC2010 is a carbide-tipped SDS-Plus rotary hammer drill bit designed for drilling into concrete and masonry. The 3\/16-inch diameter bit features a four-flute design that channels debris out of the hole efficiently during drilling. With a 2-inch usable flute length and a 4-inch overall length, it is built for anchoring applications and through-hole drilling in structural and finish concrete work. This bit is installed and used by licensed electricians, plumbers, HVAC technicians, and general contractors who require reliable, repeatable hole placement in hard substrates.\u003c\/p\u003e\n\u003cp\u003eThe HC2010 is suited for residential and light commercial applications where SDS-Plus rotary hammers are the standard tool. Typical use cases include setting concrete anchors for equipment mounts, penetrations for conduit or pipe, and through-hole drilling in block, brick, and poured concrete. Its compact 4-inch overall length makes it practical in tighter spaces where longer bits create clearance issues.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbide-tipped cutting edge for extended life in concrete and masonry\u003c\/li\u003e\n  \u003cli\u003eSDS-Plus shank for tool-free bit changes on compatible rotary hammers\u003c\/li\u003e\n  \u003cli\u003eFour-flute geometry improves debris evacuation during drilling\u003c\/li\u003e\n  \u003cli\u003e3\/16-inch diameter suits standard anchor and penetration hole sizes\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bit geometry and dimensional tolerances\u003c\/li\u003e\n  \u003cli\u003eSuitable for both anchoring and through-hole drilling applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SDS-Plus rotary hammer drills. Compatible with any tool accepting the SDS-Plus shank interface, which is the standard format across most mid-range and professional-grade rotary hammers used in the trade.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and operated by any trade professional using an SDS-Plus rotary hammer. Before drilling, verify the substrate is free of embedded conduit, rebar, or utilities using a scanning tool where required. Allow the hammer mechanism to do the work — excessive feed pressure reduces bit life and can cause bit deflection. Wear appropriate PPE including eye protection and dust control measures when drilling concrete or masonry per applicable jobsite safety requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: SDS-Plus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1900 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBit Material\u003c\/strong\u003e: Carbide-Tipped High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Concrete, Masonry\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Anchoring, Through Hole Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 10.656 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePieces Included\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BOSCH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HC2010\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BOSCH","offers":[{"title":"Default Title","offer_id":51540444873010,"sku":"HC2010","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5007cca96fcd1db102651ed935ddb0f8.jpg?v=1785855377","url":"https:\/\/voomisupply.com\/products\/bosch-hc2010-sds-plus-rotary-hammer-drill-bit-3-16-in","provider":"Voomi Supply","version":"1.0","type":"link"}