{"product_id":"boneham-sp00005061-slip-fixed-drill-bushing-3-8-in-id-steel","title":"Boneham SP00005061 Slip-fixed Drill Bushing 3\/8 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SP00005061 is a slip-fixed (SF) drill bushing used to guide cutting tools with precision during drilling, reaming, and boring operations in jig and fixture applications. Machined from steel and hardened to 60 to 65 HRC, this bushing delivers consistent bore alignment and extended service life under repeated tooling cycles. The inside diameter measures 3\/8 inches with a tolerance of +0.0001 to +0.0005 inches, ensuring tight guidance for twist drills and reamers. The body outside diameter is 3\/4 inches and the length under the head is 3\/8 inches. Installation uses the slip-fixed method, allowing the bushing to be removed and replaced without disturbing the jig plate. It is compatible with LS-1 lock screws.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for production drilling jigs, inspection fixtures, and tooling plates in metalworking and manufacturing environments. The renewable design makes it appropriate for high-cycle applications where bushings must be swapped during a production run without replacing the entire liner or jig plate. Machinists, toolmakers, and fixture builders working to ANSI standards will find this part a direct fit for standard SF-type liner installations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-fixed (SF) installation method allows quick removal and replacement during production\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for wear resistance under repeated tooling contact\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0005 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing design extends jig plate service life\u003c\/li\u003e\n  \u003cli\u003eLS-1 lock screw compatible for positive retention in the liner\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and interchangeability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI-standard SF-type slip-fixed drill bushing for use with LS-1 lock screws in standard liner-type jig plates. Compatible with tooling fixtures that accept a 3\/4-inch body outside diameter SF bushing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and removal are performed by toolmakers or machinists using the appropriate LS-1 lock screw to seat and retain the bushing in its liner. Always ensure the jig plate and liner bore are clean and free of chips or burrs before inserting the bushing. Do not press or hammer the bushing into a liner that is not sized for slip-fixed fit, as this will damage the bore and compromise tool guidance accuracy. Verify lock screw engagement before beginning any drilling or reaming operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Slip-Fixed (SF)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 3\/4 inches (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1-3\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SP00005061\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51736275976498,"sku":"SP00005061","price":23.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_ffef0d95-5cb8-4a0a-b962-e3647172b38b.jpg?v=1788776933","url":"https:\/\/voomisupply.com\/products\/boneham-sp00005061-slip-fixed-drill-bushing-3-8-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}