{"product_id":"boneham-sp00003178-drill-bushing-5-16-in-id-5-8-in-od","title":"Boneham SP00003178 Drill Bushing 5\/16 in Id 5\/8 in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SP00003178 is a press fit headless drill bushing designed to guide drill bits with precision in jig and fixture applications. Manufactured from steel with a hardness rating of 60 to 65 HRC, this bushing resists wear under repeated drilling cycles. It features a 5\/16 inch inside diameter and a 5\/8 inch body outside diameter, with an overall length of 5\/8 inch. The headless design sits flush with the jig plate surface, making it suitable for applications where a flanged collar would interfere with workpiece clearance. Machinists, toolmakers, and production shop technicians install this type of bushing as a fixed, non-renewable guide in drill jigs and fixtures.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in production drilling fixtures, tooling plates, and jig setups where consistent hole location is required across repeated operations. The press fit installation method locks the bushing permanently into the jig body without the need for locking screws or retaining hardware. It conforms to ANSI standards for drill bushings, making it a direct fit in jigs dimensioned to industry-standard specifications. Typical applications include metal fabrication shops, aerospace tooling, and general manufacturing environments requiring tight positional tolerances.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation for permanent, secure seating in jig plates\u003c\/li\u003e\n  \u003cli\u003eHardened steel construction at 60 to 65 HRC for extended wear life\u003c\/li\u003e\n  \u003cli\u003eHeadless design sits flush with jig surface for unobstructed workpiece contact\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0001 to +0.0005 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI drill bushing standards\u003c\/li\u003e\n  \u003cli\u003eNon-renewable fixed bushing  -  intended for permanent installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style fixed drill bushing for use in standard ANSI-dimensioned drill jigs and tooling fixtures requiring a 5\/16 inch inside diameter and 5\/8 inch outside diameter press fit bushing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinist-level technicians using an arbor press or hydraulic press to seat the bushing flush and square into the jig plate bore. The receiving hole in the jig plate must be machined to the correct press fit tolerance to achieve proper retention. De-energize any powered equipment and secure the workholding fixture before pressing in the bushing. Once installed, this bushing is not intended to be removed or replaced without reworking the host bore.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 5\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: H P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SP00003178\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51741382115634,"sku":"SP00003178","price":15.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_91ae9c21-9ca5-42df-b9e8-da37100c114c.jpg?v=1788831117","url":"https:\/\/voomisupply.com\/products\/boneham-sp00003178-drill-bushing-5-16-in-id-5-8-in-od","provider":"Voomi Supply","version":"1.0","type":"link"}