{"product_id":"boneham-sft2812hu-slip-fixed-drill-bushing-0-277-in-id-steel","title":"Boneham SFT2812HU Slip-fixed Drill Bushing 0.277 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SFT2812HU is a slip-fixed drill bushing designed to guide cutting tools accurately during drilling, reaming, and similar machining operations. Built to industry code SF, this bushing features a 0.277 inch inside diameter (letter size J), a 7\/16 inch body outside diameter, and a 3\/4 inch length under the head. Manufactured from steel hardened to 60-65 HRC, it provides long service life in high-wear fixture applications. The headed design and renewable configuration allow it to be removed and replaced without disturbing the jig plate, making it a practical choice for production tooling environments. Inside diameter tolerance is held to +0.0001 to +0.0005 inches for consistent tool guidance.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs and fixture plates across metalworking, fabrication, and toolroom applications. The slip-fixed style seats in a liner bushing pressed into the jig plate, locking in place under cutting load and releasing for changeout between operations. It is appropriate for both prototype and repeat-production drilling setups where positional accuracy and hole-to-hole consistency are required. Machinists, toolmakers, and fixture builders are the primary installers. The 5\/8 inch head outside diameter and 1\/4 inch head height provide a positive seating surface against the jig plate face.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eIndustry code SF slip-fixed design seats in a liner bushing and locks during cutting\u003c\/li\u003e\n  \u003cli\u003eInside diameter 0.277 inches (letter J) held to +0.0001 to +0.0005 inch tolerance for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60-65 HRC for extended wear resistance\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing — replaceable without disturbing the jig plate or liner\u003c\/li\u003e\n  \u003cli\u003eCompatible with LS-TW-2 lock screw for positive retention\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with LS-TW-2 lock screws as stated by the manufacturer. Designed as an OEM-style replacement or new-build component for drill jig fixture plates that accept SF-style slip-fixed liner bushings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinists working with drill jigs and fixture plates. Ensure the mating liner bushing bore is clean and free of chips or burrs before seating the SFT2812HU. Secure the bushing using the specified LS-TW-2 lock screw before beginning any cutting operation. Do not force or press the bushing into a bore that does not accept it freely, as distortion of the ground bore will affect tool guidance accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Slip-Fixed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.277 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Letter)\u003c\/strong\u003e: J\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 7\/16 inches (0.4375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-TW-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SFT2812HU\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51748673356082,"sku":"SFT2812HU","price":22.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_15c431a6-49be-4743-84b7-977a0514a232.jpg?v=1788896470","url":"https:\/\/voomisupply.com\/products\/boneham-sft2812hu-slip-fixed-drill-bushing-0-277-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}