{"product_id":"boneham-sft246go-slip-fixed-drill-bushing-7-32-in-id-steel","title":"Boneham SFT246GO Slip-fixed Drill Bushing 7\/32 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SFT246GO is a slip-fixed drill bushing designed to guide cutting tools accurately and repeatedly in jig and fixture applications. Manufactured from steel and hardened to 60 to 65 HRC, this bushing provides consistent bore alignment under heavy production cycles. It features a head for positive seating against the jig plate surface. The 7\/32 inch inside diameter and 3\/8 inch body outside diameter make it suited for close-tolerance drilling, reaming, and similar operations. The renewable design allows the bushing to be replaced without reworking the jig plate, reducing downtime on production tooling.\u003c\/p\u003e\n\u003cp\u003eThis bushing is intended for use in drill jigs and fixture tooling across metalworking, machining, and fabrication environments. It is typically installed by toolmakers, machinists, and fixture builders in both job-shop and production-floor settings. The slip-fixed installation method allows the bushing to be seated and secured without a press fit, making changeout straightforward. It is compatible with the LS-TW-2 lock screw for positive retention during machining operations. Applicable in fixtures where precise hole location must be maintained across repeated setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-fixed installation method for tool-free removal and replacement\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for long service life under abrasive cutting conditions\u003c\/li\u003e\n  \u003cli\u003eHead-type design seats positively against jig plate face\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing allows replacement without modifying the jig liner\u003c\/li\u003e\n  \u003cli\u003eCompatible with LS-TW-2 lock screw for secure retention during use\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with the LS-TW-2 compatible lock screw. Meets ANSI dimensional standards for slip-fixed renewable drill bushings. Verify jig liner inside diameter and plate thickness against bushing body OD and length-under-head before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinists. Before replacing or seating this bushing, ensure the machine is powered down and any fixturing is secured. The slip-fixed design requires a matching liner already installed in the jig plate; do not install directly into an unlined plate bore. Use the specified LS-TW-2 lock screw to retain the bushing during operation and confirm the screw is fully engaged before running any cutting tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Slip-Fixed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 7\/32 inches (0.2188 inches nominal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead or Headless\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-TW-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SFT246GO\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51736987959602,"sku":"SFT246GO","price":21.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_9977cba4-a7fd-49ed-ac3b-76ce43d62575.jpg?v=1788782761","url":"https:\/\/voomisupply.com\/products\/boneham-sft246go-slip-fixed-drill-bushing-7-32-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}