{"product_id":"boneham-sf6412mr-slip-fixed-drill-bushing-11-16-in-id","title":"Boneham SF6412MR Slip-fixed Drill Bushing 11\/16 in Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM SF6412MR is a slip-fixed drill bushing engineered for precision hole-location work in jig and fixture applications. Built to ANSI standards, it features an inside diameter of 0.6875 inches with a tight tolerance of +0.0001 to +0.0005 inches, a body outside diameter of 1 inch, and a head outside diameter of 1-27\/64 inches. The bushing is manufactured from steel with a hardness rating of 60 to 65 HRC, making it suitable for high-wear drilling, reaming, and boring operations. Installation is slip-fixed, meaning the bushing locks in place via a compatible lock screw rather than being permanently pressed into the liner. This part is installed by machinists, toolmakers, and fixture builders working in precision manufacturing environments.\u003c\/p\u003e\u003cp\u003eThis slip-fixed bushing is used in drill jig and fixture setups where renewable bushing replacement is required without removing the liner bushing from the plate. The SF industry code designation identifies it as a headed, slip-type renewable bushing. With a length under head of 3\/4 inches and a head height of 3\/8 inches, it is suited for standard jig plate thicknesses in both production and prototype machining operations. It accepts an LS-2 compatible lock screw for positive retention during drilling cycles.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eInside diameter of 0.6875 inches with tolerance of +0.0001 to +0.0005 inches for precise tool guidance\u003c\/li\u003e\n\u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended service life in high-cycle applications\u003c\/li\u003e\n\u003cli\u003eRenewable bushing design allows replacement without disturbing the liner bushing\u003c\/li\u003e\n\u003cli\u003eSlip-fixed installation method with LS-2 lock screw compatibility for positive retention\u003c\/li\u003e\n\u003cli\u003eHeaded design with 1-27\/64 inch head OD and 3\/8 inch head height\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards for drill bushing dimensional and tolerance requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with LS-2 lock screws. Designed as a renewable slip-fixed drill bushing for use with standard liner bushings in drill jig and fixture applications conforming to ANSI bushing standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and replacement of slip-fixed drill bushings is typically performed by toolmakers or machinists during jig setup or maintenance. Ensure the drill plate and liner bushing bore are clean and free of chips or burrs before inserting the bushing. Secure with the appropriate LS-2 lock screw to prevent rotation or withdrawal during operation. Do not force the bushing into a liner with a hammer or arbor press, as slip-fixed bushings are designed for hand-insertable fits.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Slip-Fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.6875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1-27\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF6412MR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":67911477231922,"sku":"SF6412MR","price":24.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_2a52fe37-e2bc-44fb-bb82-0ad1c0ce09c2.jpg?v=1791211027","url":"https:\/\/voomisupply.com\/products\/boneham-sf6412mr-slip-fixed-drill-bushing-11-16-in-id","provider":"Voomi Supply","version":"1.0","type":"link"}