{"product_id":"boneham-sf488lk-slip-fixed-drill-bushing-steel","title":"Boneham SF488LK Slip-fixed Drill Bushing Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF488LK is a slip-fixed drill bushing designed to guide cutting tools with precision in jig and fixture applications. Built to industry code SF, this bushing features a 0.5000-inch inside diameter, a 0.75-inch body outside diameter, and a 0.5-inch length under head. Constructed from steel hardened to 60 to 65 HRC, it delivers the wear resistance required for high-cycle production drilling. The headed design and LS-1 compatible lock screw allow secure, repeatable positioning in the liner bushing without permanent press-fit installation. It is installed and serviced by toolroom machinists, fixture builders, and precision manufacturing technicians.\u003c\/p\u003e\n\u003cp\u003eThis bushing is intended for use in drill jigs and tooling fixtures where the bushing must be changed out between operations or replaced for different drill sizes without disturbing the liner. The slip-fixed configuration allows the bushing to be locked in position during drilling and removed when the operation is complete. It is well suited for production environments running multiple operations on a single fixture, including drilling, reaming, and counterboring sequences where positional accuracy is critical.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-fixed SF industry code — removable and replaceable without liner disturbance\u003c\/li\u003e\n  \u003cli\u003e0.5000-inch inside diameter with a tight tolerance of +0.0001 to +0.0005 inches for consistent tool guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended service life in high-cycle applications\u003c\/li\u003e\n  \u003cli\u003eHeaded design with 1-3\/64-inch head outside diameter and 1\/4-inch head height for positive seating\u003c\/li\u003e\n  \u003cli\u003eLS-1 compatible lock screw for secure, repeatable locking in the liner\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing designation — designed for in-field replacement without special tooling\u003c\/li\u003e\n  \u003cli\u003eANSI standard conforming construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with LS-1 series lock screws and standard liner bushings conforming to ANSI slip-fixed bushing specifications. Fits fixtures and jig plates machined to accept 0.75-inch body outside diameter SF-type bushings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and replacement should be performed by a qualified toolroom machinist or fixture technician. Ensure the fixture plate and liner bushing are clean and free of chips or burrs before inserting the bushing. Secure with the appropriate LS-1 lock screw to prevent rotation during the cutting operation. Always verify inside diameter tolerance compatibility with the tool shank before putting the fixture into production.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.7500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 1-3\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Slip-Fixed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF488LK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51754638082354,"sku":"SF488LK","price":20.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_6875eb12-6e11-4433-876d-b2e1fcbeaae3.jpg?v=1788947323","url":"https:\/\/voomisupply.com\/products\/boneham-sf488lk-slip-fixed-drill-bushing-steel","provider":"Voomi Supply","version":"1.0","type":"link"}