{"product_id":"boneham-sf328hl-slip-fixed-drill-bushing-0-261-in-id","title":"Boneham SF328HL Slip-fixed Drill Bushing 0.261 in Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe BONEHAM SF328HL is a slip-fixed drill bushing designed to guide cutting tools with precision in jig and fixture applications. Built to industry code SF, this bushing features an inside diameter of 0.261 inches (Letter G) with a tight tolerance of +0.0001 to +0.0005 inches, ensuring repeatable hole location accuracy. The body outside diameter measures 0.500 inches with a length under the head of 0.500 inches. Constructed from steel hardened to 60 to 65 HRC, the SF328HL delivers the wear resistance required for production drilling environments. A headed design and LS-1 compatible lock screw keep the bushing secured in the liner during operation. Tool and die makers, machinists, and fixture builders install this type of component in precision jig plates.\u003c\/p\u003e\u003cp\u003eThis slip-fixed bushing is intended for use in drill jig and fixture assemblies where the bushing must be retained by a lock screw during the drilling, reaming, or boring operation. The slip-fixed design allows the bushing to be removed and replaced without disturbing the liner bushing pressed into the jig plate, making it well-suited for production runs that require tool changes between operations. The renewable design extends fixture service life by allowing worn bushings to be swapped out individually.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eInside diameter of 0.261 inches (Letter G) with tolerance of +0.0001 to +0.0005 inches for precise tool guidance\u003c\/li\u003e\n\u003cli\u003eBody outside diameter of 0.500 inches and 0.500-inch length under head for standard liner compatibility\u003c\/li\u003e\n\u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear life in production drilling\u003c\/li\u003e\n\u003cli\u003eHeaded design with LS-1 compatible lock screw retention\u003c\/li\u003e\n\u003cli\u003eRenewable bushing — replaceable without removing the liner from the jig plate\u003c\/li\u003e\n\u003cli\u003eConforms to ANSI standards for slip-fixed drill bushings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with LS-1 lock screws. Designed as an ANSI-standard SF slip-fixed drill bushing for use with matching liner bushings in jig and fixture assemblies.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by machinists or tool and die makers during jig assembly or bushing replacement. Ensure the liner bushing in the jig plate is clean and free of chips before inserting the slip-fixed bushing. Align the lock screw slot with the retaining screw and secure with an LS-1 compatible screw before beginning the cutting operation. Do not force the bushing into the liner — a properly matched liner and slip-fixed bushing should seat with light hand pressure.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.261 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter (Letter)\u003c\/strong\u003e: G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 51\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF328HL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51730876203314,"sku":"SF328HL","price":21.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_6fc15234-135d-4095-a234-5ee55da8e077.jpg?v=1788724242","url":"https:\/\/voomisupply.com\/products\/boneham-sf328hl-slip-fixed-drill-bushing-0-261-in-id","provider":"Voomi Supply","version":"1.0","type":"link"}