{"product_id":"boneham-sf328ez-slip-fixed-drill-bushing-0-161-in-id-steel","title":"Boneham SF328EZ Slip-fixed Drill Bushing 0.161 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF328EZ is a slip-fixed drill bushing designed for use in jig and fixture tooling applications. It features a 0.161 inch (number 20 wire gauge) inside diameter with tight tolerance control of +0.0001 to +0.0004 inches, ensuring accurate and repeatable hole location during drilling operations. The body measures 0.500 inch outside diameter with a 0.797 inch head outside diameter and a 0.250 inch head height. Constructed from steel hardened to 60 to 65 HRC, this bushing delivers long service life under production drilling conditions. It is compatible with the LS-1 lock screw and meets ANSI standards. Machinists, tool and die makers, and fixture builders install this bushing in drill jigs for precision guided drilling.\u003c\/p\u003e\n\u003cp\u003eThe SF328EZ is suited for production and inspection fixtures where consistent hole positioning is critical. The slip-fixed style allows the bushing to be installed and retained in a liner bushing, making it practical for tooling setups that require tool changes between operations. The 0.500 inch body outside diameter and 0.500 inch length under head fit standard jig plate configurations. This bushing is renewable, meaning it can be replaced without scrapping the fixture plate, reducing tooling maintenance cost over time.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened steel construction at 60 to 65 HRC for extended wear life in high-cycle drilling fixtures\u003c\/li\u003e\n  \u003cli\u003ePrecision inside diameter of 0.161 inches with tolerance of +0.0001 to +0.0004 inches for accurate drill guidance\u003c\/li\u003e\n  \u003cli\u003eSlip-fixed design with head for retention via LS-1 compatible lock screw\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing — replaceable without reworking the fixture plate\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and tolerances\u003c\/li\u003e\n  \u003cli\u003e0.500 inch body outside diameter and 0.500 inch length under head for standard jig plate fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a slip-fixed style replacement bushing compatible with LS-1 lock screws and standard liner bushings in ANSI-compliant drill jigs and fixtures.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinists assembling or servicing drill jigs and fixtures. The bushing slips into a mating liner bushing and is secured with an LS-1 lock screw — verify the lock screw is fully engaged before operating. Ensure the fixture is de-energized and the drill press or machining center is powered down before replacing bushings. Do not press or hammer the bushing directly on the head flange, as this may damage the precision bore.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Slip-Fixed (SF)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.161 inches (Number 20 Wire Gauge)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 0.797 inches (51\/64 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.250 inches (1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF328EZ\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51734127968562,"sku":"SF328EZ","price":23.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_80a37b8f-159e-4310-933b-fc4e36d11c9a.jpg?v=1788761027","url":"https:\/\/voomisupply.com\/products\/boneham-sf328ez-slip-fixed-drill-bushing-0-161-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}