{"product_id":"boneham-sf326ge-slip-fixed-drill-bushing-13-64-in-id-steel","title":"Boneham SF326GE Slip-fixed Drill Bushing 13\/64 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF326GE is a slip-fixed drill bushing designed to guide cutting tools with precision in jig and fixture applications. It features an inside diameter of 13\/64 inches, a body outside diameter of 0.500 inches, and a head outside diameter of 51\/64 inches. The bushing is machined from steel and heat-treated to a hardness of 60 to 65 HRC, providing wear resistance suited to repeated drilling cycles. The inside diameter tolerance is held to +0.0001 to +0.0004 inches, ensuring consistent tool guidance. Installation requires an LS-1 compatible lock screw, which is not included. Licensed machinists, toolmakers, and fixture builders are the typical installers.\u003c\/p\u003e\n\u003cp\u003eThe SF326GE is used in drill jigs and production fixtures where a renewable, slip-fixed bushing is required. The SF industry code identifies it as a head-type slip bushing that mounts in a liner bushing and can be removed and replaced without disturbing the jig plate. With a body length under head of 3\/8 inches and a head height of 1\/4 inches, it suits standard jig-plate thicknesses in light to medium production drilling setups. This bushing meets ANSI standards and is appropriate for both manual and CNC-assisted jig drilling operations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-fixed installation method with SF industry code designation per ANSI standards\u003c\/li\u003e\n  \u003cli\u003eInside diameter of 13\/64 inches held to a +0.0001 to +0.0004 inch tolerance for accurate tool guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction heat-treated to 60 to 65 HRC for extended wear life\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing design allows replacement without removing the liner bushing from the jig plate\u003c\/li\u003e\n  \u003cli\u003eCompatible with LS-1 lock screws for secure seating in the liner bushing\u003c\/li\u003e\n  \u003cli\u003eHead-type configuration with 51\/64 inch head OD and 1\/4 inch head height for positive axial location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ANSI-standard liner bushings in drill jig and fixture applications requiring an SF-series slip-fixed renewable bushing. Requires an LS-1 compatible lock screw for installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinist tradespeople during jig setup or bushing replacement. The bushing slips into a mating liner bushing already pressed into the jig plate and is secured with an LS-1 lock screw. Ensure the liner bushing bore and the SF326GE body OD are clean and free of chips before seating. Never drive the bushing with a hammer; hand-press or use a soft-faced mallet only to avoid damaging the precision bore.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 13\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 51\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Slip-Fixed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF326GE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51729713332530,"sku":"SF326GE","price":20.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_a1bc108a-a79c-4c58-a271-1be7f00888af.jpg?v=1788708282","url":"https:\/\/voomisupply.com\/products\/boneham-sf326ge-slip-fixed-drill-bushing-13-64-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}