{"product_id":"boneham-sf326fp-slip-fixed-drill-bushing-0-182-in-id-steel","title":"Boneham SF326FP Slip-fixed Drill Bushing 0.182 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF326FP is a slip-fixed drill bushing designed for precision hole-location applications in jig and fixture work. Built to ANSI standards, it features a 0.182 inch (wire size 14) inside diameter and a 0.500 inch body outside diameter, with a 3\/8 inch length under the head. The head-style design and hardened steel construction — rated 60 to 65 HRC — make it suited for high-wear drilling operations where consistent positional accuracy is required. A renewable design and LS-1 lock screw compatibility allow for easy field replacement without disturbing the liner bushing. Machinists, toolmakers, and fixture builders are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs and production fixtures where repeatable hole placement is critical across moderate to high cycle counts. The slip-fixed configuration allows the bushing to be locked in place with an LS-1 compatible set screw, preventing rotation during drilling. It is appropriate for both prototype tooling and production-grade jig assemblies in metalworking environments. The head type provides a positive stop against the jig plate surface, controlling the installed depth of the bushing without additional hardware.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.182 inch inside diameter (wire size 14) with a close tolerance of +0.0001 to +0.0004 inch for accurate hole location\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for extended wear life in high-cycle drilling applications\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing design allows replacement in the field without replacing the liner\u003c\/li\u003e\n  \u003cli\u003eLS-1 lock screw compatible for positive rotational lockup in slip-fixed applications\u003c\/li\u003e\n  \u003cli\u003eHead-style configuration with a 51\/64 inch head outside diameter and 1\/4 inch head height provides a positive seating surface\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing geometry and dimensional tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI-standard SF-series slip-fixed drill bushing compatible with standard liner bushings and jig plates accepting a 1\/2 inch body outside diameter. Requires an LS-1 compatible lock screw for installation (sold separately).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolmakers or machinists working with drill jigs and fixture plates. The bushing is pressed or slipped into a mating liner bushing and secured with an LS-1 lock screw to prevent rotation during use. Ensure the jig plate and liner bushing are clean and free of burrs before installation to maintain dimensional accuracy. Always confirm the lock screw is fully engaged before beginning a drilling operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Size)\u003c\/strong\u003e: 14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.182 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 51\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF326FP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51738836599090,"sku":"SF326FP","price":22.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_e4c5e686-b98c-4148-b3bb-e65035be0e1c.jpg?v=1788805310","url":"https:\/\/voomisupply.com\/products\/boneham-sf326fp-slip-fixed-drill-bushing-0-182-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}