{"product_id":"boneham-sf326fk-slip-fixed-drill-bushing-0-177in-id-steel","title":"Boneham SF326FK Slip-fixed Drill Bushing 0.177in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF326FK is a slip-fixed drill bushing designed for precision hole guidance in jig and fixture applications. Built to ANSI standards, this SF-series bushing features a 0.177 inch (No. 16 wire gauge) inside diameter and a 0.5 inch body outside diameter, with a 0.375 inch length under the head. Machined from steel and hardened to 60 to 65 HRC, it delivers the dimensional accuracy and wear resistance required for production drilling operations. The head-type design locks into a drill jig liner and accepts an LS-1 compatible lock screw for positive retention during use.\u003c\/p\u003e\n\u003cp\u003eSlip-fixed bushings in the SF series are used in drill jigs where a single bushing guides the drill through repeated operations without removal between cycles. This bushing is suited for metal fabrication, toolroom, and production machining environments. The renewable design allows the bushing to be replaced when worn without replacing the jig plate or liner. An inside diameter tolerance of plus 0.0001 to plus 0.0004 inches ensures consistent drill guidance and repeatable hole location across high-volume runs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSF-series slip-fixed head bushing per ANSI standards\u003c\/li\u003e\n  \u003cli\u003e0.177 inch inside diameter (No. 16 wire gauge) with tight tolerance of plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for long service life in production jigs\u003c\/li\u003e\n  \u003cli\u003eHead outside diameter of 0.797 inches (51\/64 inch) and head height of 0.25 inches\u003c\/li\u003e\n  \u003cli\u003eLS-1 compatible lock screw for positive retention in the liner\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing design for easy field replacement without jig rework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with LS-1 series lock screws and standard ANSI jig bushing liners accepting a 0.5 inch body outside diameter slip-fixed bushing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by toolroom machinists or fixture builders using appropriate bushing press or hand tools. The jig liner and mating surfaces should be clean and free of burrs before pressing the bushing into position. Secure with the appropriate LS-1 lock screw to prevent rotation or axial movement during drilling. Do not install without the lock screw engaged, as the slip-fixed design is not self-retaining under cutting forces alone.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Slip-Fixed (SF Series)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.177 inches (No. 16 wire gauge)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 0.797 inches (51\/64 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF326FK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51751904051506,"sku":"SF326FK","price":22.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_11a3b082-ee93-42c5-97e4-f0003e3ec81c.jpg?v=1788924639","url":"https:\/\/voomisupply.com\/products\/boneham-sf326fk-slip-fixed-drill-bushing-0-177in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}