{"product_id":"boneham-sf326ff-slip-fixed-drill-bushing-0-1695-in-id","title":"Boneham SF326FF Slip-fixed Drill Bushing 0.1695 in Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF326FF is a slip-fixed drill bushing designed to guide cutting tools with precision during drilling, reaming, and boring operations in jig and fixture applications. Built from steel with a hardness rating of 60 to 65 HRC, this bushing delivers consistent tool guidance and extended service life in production environments. It features a 0.1695 inch inside diameter corresponding to a Number 18 wire gauge designation, a 1\/2 inch body outside diameter, and a 3\/8 inch length under the head. The renewable design allows the bushing to be replaced without disturbing the fixture liner, making it well suited for high-cycle production jig work. Installation and removal are controlled by an LS-1 compatible lock screw.\u003c\/p\u003e\n\u003cp\u003eThis bushing is intended for use in drill jig fixtures in manufacturing, metalworking, and machine shop environments. It fits into a standard liner bushing and is held in position by a lock screw. The head type configuration positions the flanged head flush against the jig plate surface, providing a positive stop during tool entry. Typical installers include machinists, toolmakers, and fixture builders working in production or job-shop settings where repeatable hole location is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-fixed bushing type per ANSI standards with SF industry code designation\u003c\/li\u003e\n  \u003cli\u003e0.1695 inch inside diameter (Number 18 wire gauge) with a tight tolerance of plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for wear resistance in repetitive drilling applications\u003c\/li\u003e\n  \u003cli\u003eRenewable design allows field replacement within the liner bushing without fixture disassembly\u003c\/li\u003e\n  \u003cli\u003eLS-1 compatible lock screw interface for secure, repeatable seating\u003c\/li\u003e\n  \u003cli\u003eHead type with 51\/64 inch head outside diameter and 1\/4 inch head height for positive axial location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with LS-1 compatible lock screws and standard liner bushings. Meets ANSI specifications for SF-series slip-fixed drill bushings used in jig and fixture tooling.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSlip-fixed bushings are installed and removed by machinists or toolmakers using the appropriate LS-1 lock screw. Before installing or removing the bushing, ensure all cutting tools are withdrawn and the machine spindle is fully stopped. The bushing should seat fully into the liner before the lock screw is engaged. Inspect the liner bore and mating surfaces for wear or debris prior to installation to maintain hole location accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.1695 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire Gauge)\u003c\/strong\u003e: Number 18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 51\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF326FF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51744507527474,"sku":"SF326FF","price":22.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_de9c194a-8ab8-4b01-a799-d7732e2c5474.jpg?v=1788857483","url":"https:\/\/voomisupply.com\/products\/boneham-sf326ff-slip-fixed-drill-bushing-0-1695-in-id","provider":"Voomi Supply","version":"1.0","type":"link"}