{"product_id":"boneham-sf206ej-slip-fixed-drill-bushing-0-144-in-id-steel","title":"Boneham SF206EJ Slip-fixed Drill Bushing 0.144 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF206EJ is a slip-fixed drill bushing designed to guide cutting tools with high positional accuracy in jig and fixture applications. Built to ANSI standards, this bushing features a 0.144 inch (Number 27 wire gauge) inside diameter and a 5\/16 inch body outside diameter. The head-type design with a 35\/64 inch head outside diameter seats securely against the jig plate, and the 3\/8 inch length under head suits standard plate thicknesses. Hardness runs from 60 to 65 HRC, giving the bore surface the wear resistance needed for repeated tool passes. The SF bushing is renewable and compatible with the LS-1 lock screw, making tool changeover straightforward on production jigs. Machinists, tool-and-die makers, and fixture builders are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs, reaming fixtures, and multi-operation tooling plates in both job-shop and production environments. The SF industry-code designation identifies it as a slip-fixed type, meaning it can be removed and replaced without disturbing the liner bushing pressed into the jig plate. It is well suited to operations that require frequent bushing changes between drilling, reaming, or countersinking steps on the same hole. The LS-1 lock screw compatibility ensures the bushing stays positively located during cutting without rotation or axial movement.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.144 inch inside diameter with a tight tolerance of plus 0.0001 to plus 0.0004 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003e60 to 65 HRC hardness for extended wear life at the bore surface\u003c\/li\u003e\n  \u003cli\u003eRenewable design allows removal and replacement without disturbing the pressed liner bushing\u003c\/li\u003e\n  \u003cli\u003eLS-1 lock screw compatible for secure, rotation-free seating in the jig plate\u003c\/li\u003e\n  \u003cli\u003eHead-type configuration with 35\/64 inch head OD and 1\/4 inch head height for positive seating against the fixture face\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing geometry and tolerancing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an ANSI SF-series slip-fixed drill bushing for use with standard pressed liner bushings in drill jig and fixture applications. Compatible with LS-1 lock screws as specified by the manufacturer.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by machinists or tool-and-die professionals during jig setup or bushing changeover. Ensure the mating liner bushing bore and the jig plate are clean and free of chips before inserting the SF bushing. Secure the bushing with the appropriate LS-1 lock screw to prevent rotation during the cutting operation. Always verify inside diameter and body OD match the liner and tooling specifications before beginning the operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Slip-Fixed (SF)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.144 inches (Number 27 wire gauge)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: plus 0.0001 to plus 0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 5\/16 inches (0.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 35\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF206EJ\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51750944964914,"sku":"SF206EJ","price":25.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_7ca018c2-d618-4a21-b17b-b299cb75cd3e.jpg?v=1788920747","url":"https:\/\/voomisupply.com\/products\/boneham-sf206ej-slip-fixed-drill-bushing-0-144-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}