{"product_id":"boneham-sf206de-slip-fixed-drill-bushing-0-104-in-id-steel","title":"Boneham SF206DE Slip-fixed Drill Bushing 0.104 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF206DE is a slip-fixed drill bushing designed to guide drill bits and cutting tools with precision in jig and fixture applications. Built from steel with a hardness of 60 to 65 HRC, this SF-series bushing features a 0.104 inch inside diameter (wire size number 37) and a 0.3125 inch body outside diameter. The inside diameter tolerance is held to +0.0001 to +0.0004 inches, ensuring consistent hole location across repeated operations. The head-style design and renewable construction make it suitable for production drilling environments where bushing replacement is part of routine maintenance. Machinists, tool and die makers, and fixture builders are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jigs and machining fixtures where guided drilling, reaming, or boring operations require repeatable accuracy. The slip-fixed configuration allows the bushing to be seated and secured in a jig plate liner bushing using an LS-1 compatible lock screw. The 0.375 inch length under head accommodates standard jig plate thicknesses in light to medium production setups. The renewable design means the bushing can be replaced without disturbing the liner bushing already pressed into the fixture plate, reducing downtime between production runs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSF-series slip-fixed bushing with head for positive seating in liner bushings\u003c\/li\u003e\n  \u003cli\u003e0.104 inch inside diameter (wire gauge number 37) with tight tolerance of +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for wear resistance under repeated tool contact\u003c\/li\u003e\n  \u003cli\u003eRenewable design allows bushing replacement without removing the liner from the fixture plate\u003c\/li\u003e\n  \u003cli\u003eCompatible with LS-1 lock screw for secure, rotation-resistant seating\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for drill bushing dimensions and interchangeability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with LS-1 compatible lock screws and standard ANSI-dimensioned liner bushings in drill jig and fixture applications. Conforms to ANSI slip-fixed bushing standards for dimensional interchangeability.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by machinists or tool and die makers during fixture setup or bushing replacement. The fixture plate and any associated tooling should be fully de-energized and secured before bushing service. Insert the bushing into the liner bushing and rotate to align the head notch with the lock screw, then secure with an LS-1 compatible screw. Do not force or hammer the bushing into the liner, as this can damage the bore or alter inside diameter tolerance.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.104 inches (Wire Size Number 37)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.3125 inches (5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 35\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.25 inches (1\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF206DE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51744493895986,"sku":"SF206DE","price":25.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_1a465823-506e-48d0-8bf7-521b4ca4e83b.jpg?v=1788857348","url":"https:\/\/voomisupply.com\/products\/boneham-sf206de-slip-fixed-drill-bushing-0-104-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}