{"product_id":"boneham-sf2016fn-slip-fixed-drill-bushing-0-18-in-id-steel","title":"Boneham SF2016FN Slip-fixed Drill Bushing 0.18 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM SF2016FN is a slip-fixed drill bushing designed for precision hole-location work in jigs and fixtures. It carries industry code SF and accepts a No. 15 wire gauge drill (0.1800 inch ID) with an inside diameter tolerance of +0.0001 to +0.0004 inches. The body outside diameter measures 0.3125 inches (5\/16 inch) and the length under head is 1 inch. Constructed from steel hardened to 60 to 65 HRC, the SF2016FN delivers the wear resistance required for repetitive drilling operations. It includes a head and is counterbored, and it is compatible with the LS-1 lock screw for secure seating in the liner. Toolmakers, jig-bore operators, and machining technicians are the typical installers.\u003c\/p\u003e\n\u003cp\u003eThis bushing is used in drill jig applications where a renewable, slip-in design is needed. The slip-fixed configuration allows the bushing to be inserted into a liner bushing already pressed into the jig plate, then locked in place with an LS-1 compatible set screw. This makes it well-suited for production environments where the bushing must be replaced periodically due to wear without disturbing the jig plate. It conforms to ANSI standards for slip-fixed bushings, which is important on shop floors where interchangeability across tooling setups is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-fixed (SF) design seats into a pressed liner bushing and locks with an LS-1 lock screw\u003c\/li\u003e\n  \u003cli\u003e0.1800 inch ID (No. 15 wire gauge) with tight tolerance of +0.0001 to +0.0004 inches for precise drill guidance\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for long service life under repetitive drilling\u003c\/li\u003e\n  \u003cli\u003eCounterbored head design with 35\/64 inch head OD and 1\/4 inch head height\u003c\/li\u003e\n  \u003cli\u003eRenewable bushing — replaceable without disturbing the jig plate liner\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for slip-fixed drill bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ANSI-standard liner bushings and LS-1 lock screws in drill jig setups. Compatible with standard SF-series liner bushings per ANSI specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by toolmakers or machining technicians during jig setup or bushing replacement. Power down and lock out all machine tooling before inserting or removing bushings from a jig plate. Seat the bushing fully into the liner, then secure with the appropriate LS-1 lock screw — do not overtighten the lock screw in a way that distorts the bore. Verify ID alignment and concentricity before returning the jig to production use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: SF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Wire)\u003c\/strong\u003e: No. 15\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter (Decimal)\u003c\/strong\u003e: 0.1800 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0001 to +0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 0.3125 inches (5\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Outside Diameter\u003c\/strong\u003e: 35\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Head (with counterbore)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable Bushing\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Compatibility\u003c\/strong\u003e: LS-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SF2016FN\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51747994861874,"sku":"SF2016FN","price":32.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d089b0a7b36c5d4ca8f716b32e5b0d8a_df51d254-c906-4470-a1ae-66989cc62bc2.jpg?v=1788887834","url":"https:\/\/voomisupply.com\/products\/boneham-sf2016fn-slip-fixed-drill-bushing-0-18-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}