{"product_id":"boneham-pt8810op-headless-drill-bushing-63-64-in-id-steel","title":"Boneham PT8810OP Headless Drill Bushing 63\/64 in Id Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe BONEHAM PT8810OP is a press fit headless drill bushing designed to guide cutting tools with precision in jig and fixture applications. This bushing features a 63\/64 inch inside diameter, a 1-3\/8 inch body outside diameter, and a 5\/8 inch overall length. Manufactured from steel and hardened to 60 to 65 HRC, it delivers the wear resistance required for repetitive drilling operations in production environments. The inside diameter tolerance of +0.0002 to +0.0006 inches ensures consistent tool guidance and hole location accuracy. Machinists, tool and die makers, and production shop technicians install this bushing as part of drill jig assemblies.\u003c\/p\u003e\n\u003cp\u003eThis bushing is suited for use in drill jigs, fixtures, and tooling plates across general metalworking, fabrication, and production machining environments. The headless, press fit design allows it to seat flush within the jig body without a protruding flange, making it appropriate for applications where clearance is limited or a smooth top surface is required. It conforms to ANSI standards and carries the Bushing Industry Code P designation, which defines its dimensional series within the standard headless press fit classification.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePress fit installation method — seats securely into the jig body without fasteners\u003c\/li\u003e\n  \u003cli\u003eHeadless design provides a flush, low-profile seating surface\u003c\/li\u003e\n  \u003cli\u003eSteel construction hardened to 60 to 65 HRC for long service life under repeated tool contact\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of +0.0002 to +0.0006 inches for precise tool guidance\u003c\/li\u003e\n  \u003cli\u003eANSI-conforming dimensions under Bushing Industry Code P\u003c\/li\u003e\n  \u003cli\u003eNot renewable — intended as a permanent press fit installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard ANSI Bushing Industry Code P press fit headless drill bushing for use in drill jigs and fixtures requiring a 63\/64 inch tool guide bore.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a machinist or tool and die technician using an arbor press to drive the bushing into a properly reamed or bored hole in the jig plate. The receiving hole must be dimensioned to achieve the correct interference fit as specified by ANSI jig bushing standards. Do not hammer the bushing directly with a steel face hammer, as this can damage the bore or distort the OD. Once pressed in, this bushing is not designed for removal and replacement.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Industry Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Method\u003c\/strong\u003e: Press Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 63\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: +0.0002 to +0.0006 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Outside Diameter\u003c\/strong\u003e: 1-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Bushing Length\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Style\u003c\/strong\u003e: Headless\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 60 to 65 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRenewable\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCounterbored\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: BONEHAM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT8810OP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BONEHAM","offers":[{"title":"Default Title","offer_id":51727630958898,"sku":"PT8810OP","price":25.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/772b15bcdae08b51210f0eebedf78b00_e380224d-9818-4c60-94d2-80393ed55641.jpg?v=1788680306","url":"https:\/\/voomisupply.com\/products\/boneham-pt8810op-headless-drill-bushing-63-64-in-id-steel","provider":"Voomi Supply","version":"1.0","type":"link"}